
EN 11
EN
Revision 06/2016Copyright © 2016, Fast ČR, a. s.
Wi-Fi control
When you fi rst connect to agiven computer port it usually fi rst seeks drivers for the
appropriate connections. An internet connection will eventually be required to download
operating system updates. Wait for the installation process to fi nish. If the installation fails, try
adifferent port, or replace the cable.
Reading card – You can remove the MicroSD card from the turned off camera and insert it in
the corresponding card reader in the computer. You can then directly read the recorded fi les
from the card from the Lock, Movie, Photo and store them for further processing or archiving
on the computer.
5. Wi-Fi control
The camera is able to capture and also provide basic control of the mobile phone (Android /
iPhone) using awireless Wi-Fi connection. The on-board controls are disabled when remote
control is active.
To save energy, the Wi-Fi function is disabled by default. Turning on the Wi-Fi (in the Settings
menu or by pressing UP) activates the transmitter in the camera, which waits for connecting
of external control application, operating green LED fl ashes, the display shows WiFI and after
initializing the transmitter message about the name of the transmitter (WiFi-SSID) and access.
Start controls over WiFi (with default values) as follows:
1. Install in your mobile phone asuitable application from the store from your phone e.g.
X-DV APP (wisdomplus).
2. Switch on the function WiFi camera and also mobile phone and start the XDV
application.
AM 4K01W SENCOR EN CZ SK PL HU.indb 11 8.6.2016 14:25:1