
8 EN
EN
Revision 06/2016Copyright © 2016, Fast ČR, a. s.
Start-up
2. The camera also switches on and off (based on the current settings, see further) by
connecting and disconnecting the power supply, for example in the car, according to the
ignition key position.
3. The camera can also be confi gured to automatically start based on its internal motion
detectors and shut down after aconfi gurable delay.
3.5. Switching between modes
Press the on/off switch shortly to switch between modes: Recording video/Photography/
Recording fast events/Playback/Setting.
The mode is indicated by the following symbols in the top left corner of the active display:
Video camera/Camera/Shadowrunner/Play (triangle)/Tools.
3.6. Recording videos and taking photos
Recording (Video Recording mode) and taking photos (Camera) is possible if amemory card is
inserted into the camera and properly formatted. This can easily be achieved by pressing the
OK on the top of the camera when the display is on. If the display off (PowerSave), the fi rst
press of the button activates the display and the second press performs the desired function.
To stop an active recording process, press OK again when the display is on.
The ongoing recording is indicated by aslowly blinking blue operating indicator and
symbol “TF” of the inserted card and ared dot on the display lights up. Taking apicture is
accompanied by the typical shutter sound from the camera speaker.
3.7. Recording playback and viewing photos
By switching to playback mode you begin to browse fi les, video clips are marked with
atriangle (symbol PLAY). Press Up and Down to navigate between fi les. You can view entire
video fi les – press OK to play/pause videos, Up to move back and Down to move forward.
You can Stop playback by pressing briefl y the button On (Mode).
AM 4K01W SENCOR EN CZ SK PL HU.indb 8 8.6.2016 14:25:0