Инструкция по эксплуатации Saturn ST-MC9181 — страница 3

2) Circuit Diagram

Computer Elementary Diagram 3) Product Structure

1 Handle Cover 2 Handle 3 Lid 4 Floating Valve 5 Relief Valve

6 Auto Bolt 7 Inner Pot 8 Housing 9 Upper Edge 10 Control Panel 11 Heating Plate

12 Unit Base 13 Floater 14 Water Collector 15 Power Cord 16 Seal Ring for Floating Valve 17 Filter 18 Seal Belt 19 Aluminum Lid

4) How To Use This Product 1 Open the lid Hold the handle firmly turn it clockwise to the clamping position and then lift it. (See Figure 1.)

2 Take out the inner pot and place and water in The amount of food and water shall not exceed 4/5 of the height of inner pot For food that will expand in water the level should not exceed 3/5 of the inner pot The minimum allowable level would be 1/5 of the inner pot (See Figure 2.)

In case of cooking rice the maximum amount of rice allowed 12 cups Normally one cup of rice will need one cup of water for cooking rice But this can be changed according to the taste of different individuals. 3 Clean the inner pot and heating plate before cooking; be sure there are no sundries left inside the outer pot or on the surface of heating plate; turn the inner pot slightly to fit it well with the heating plate (See Figure 3.)

4 Close the lid *Make sure the seal belt fitted onto the Aluminum lid;
*Move the seal belt to make sure it fit snugly in place in the lid;
*Close the lid and turn the handle counter-clockwise till a sound of clamping is heard (See Figure 4.) 5 Fix the pressure relief valve in place;
turn it to ‘Airproof’ position and check whether the floater has fallen down (the floater should be down in place before heating) (See Figure 5.)

6 Switch power on and a sound ‘ Bi’ will be heard display shows “00:00” in red,