Инструкция по эксплуатации Saturn ST-FP7099 — страница 4

Using methods/operating methods

1 Place the meat grinder on a dry and horizontal surface Connect the power supply and turn on the push button

The prepared food put into feeder tray Please use food pusher slowly pushing food 2 After the use please cut off the power supply.

Instruction for use of slicer/shredder

Name of Parts

Operating the shredder

Recline the catch and put one of the drums with the clutch facing the middle of the chamber.

Snap the catch.

Assemble the chamber of the shredder just as like mincing chamber.

Cut large products into smaller elements which you can easily put into the mincing chamber.

Do not mash soft fruits containing stones.

When the work is finished pull the power cord out from the network supply socket.

Remove the food remaining in the shredder chamber or on the grater with a wooden spoon.

Blades of the drums do not require any regeneration.

Tomato juicer using Name of parts

Operating the tomato ketchup:

1 Chop in tomatoes firstly.

2 Put the tomatoes loaf on the tray

3 Turn on the power switch and make sure the equipment moves all right before put the food into the tray and use food pusher to stress

Warning： While operating if the food stuck the screw disconnect the power quickly

Electric circuit diagram

Cleaning and maintenance

Note: the appliance is easier to clean if you do so immediately after use.

* If there is food gets stuck immediately shut off the power supply startup reversal function of the appliance and take out the stucked food then the appliance can be used again.

* Don't use this machine or cleaning please pull power plugs.

* Do not use abrasive cleaning agents scourers acetone alcohol etc to clean the appliance.

* Part equipment is sharp remove instruments utensils carefully when cleaning please use the brush to clean in order to avoid scratches the finger.

* Never immerse the motor unit in water nor rinse it under the tap.

* Avoid any bumping of the appliance otherwise it will be deformed or broken.

* After usage please clean the appliance and wipe the parts with a dry cloth and store it in dry and windy place.

* Wash the metal parts in hot water with addition of the dishwashing liquid.