Инструкция по эксплуатации Saturn ST-FP1095 — страница 3

appliance or any part of it is likely to be damaged to avoid risk of fire electric shock or any other damage and/or injuries to persons The appliance is likely to be damaged if the appliance has been subject to inadmissible strain (e.g overheating mechanical or electric shock) or if there are any cracks excessively frayed or melted parts or distortions or if the appliance is not working properly In this case immediately unplug the appliance and return the entire appliance (including all parts and accessories) to an authorized service centre for examination and repair.

• Repair and technical maintenance of the appliance or power cord are only allowed to be accomplished by an authorized service center.

• During operation keep the appliance in an appropriate distance of at least 10 cm on each side and 50 cm in front and above to furniture walls boards curtains and any delicate objects Before operation always ensure that the appliance is assembled properly and completely.

Solely use the appliance for processing edible food Immediately unplug the appliance if there is any kind of malfunction or problem (e.g the motor gets stuck overheating).

• Operate the appliance on a well accessible stable level dry water-resistant and suitable large table or counter Always keep the appliance and the table or counter clean and dry and wipe off spilled liquids immediately Do not place any clothes or tissue or other objects under or on the appliance during operation to avoid risk of fire electric shock and overheating.

Do not place the appliance over a power cord or near the edge of the table or counter or on wet or inclined surfaces or where it can fall.

• This appliance is NOT intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children must be supervised to ensure that they do not play with the appliance or any parts of the appliance or the packaging

Always keep the appliance where it is dry and clean and where young children cannot reach it

Do not leave the appliance unattended when it is in reach of young children or when the appliance is connected to the power supply Do not place any hard and/or heavy objects on the appliance or any part of it Take care that no one will pull the appliance by the power cord.

• Do not use any hard sharp or edged objects (e.g knives forks) with the appliance Only use the provided pusher for feeding food into the feed tube Do not handle the appliance or any part of it with violence Do not let the motor work continuously for more than 3 minutes

Always use only one matching sets of tools to avoid damage (see: “Knowing

Your Design Mincer”) For mincing always use only one of the provided grinding discs Do not process bones nuts frozen foods or any other hard items.

• Do not place the appliance or any part of it on or near hot surfaces (e.g burner heater or oven) Do not use any parts or tools of the appliance with any other device.

• Do not grasp in the gear hole of the motor housing with the appliance connected to the power supply

If you have forgotten to switch OFF the appliance before disconnecting from the power supply wait at least 10 seconds before inserting the plug into the power socket again.

• Do not leave the appliance unattended during operation Always switch off (ON/OFF switch) at first then unplug the appliance and wait until the motor comes to a standstill before moving or cleaning or assembling or disassembling any parts or when the appliance is not in use Always grasp the motor housing at both sides near the bottom for moving or lifting Do not hold the appliance at the feed pan or worm housing for moving the appliance.

• Do not use any abrasive cleaners cleaning pads (e.g metal scouring pads) or any corrosive chemicals (e.g bleach) for cleaning Do not immerse the motor housing or power cord in water or any other liquid Do not spill or drip any liquids on the motor housing or on the power cord to avoid risk of fire and electric shock Do not pour any liquids in the feed tube with the worm housing connected to the motor housing! When liquids are spilled on the motor housing immediately unplug the appliance switch off the appliance completely (ON/OFF button) and wait for the appliance to cool down Thereafter clean and dry the appliance thoroughly (see: “Care and Cleaning”).

• Do not place the appliance or any of its parts or tools in an automatic 5

dishwasher.

• Do not leave any food dry on the appliance Always clean the appliance after each use to prevent a build up of bakedon foods (see: “Care and Cleaning”) Always keep the appliance and the tools clean.

• Only use spare parts and accessories which are provided and recommended by the manufacturer Damaged or improper parts may break in use damage the appliance or cause injury.

• Never try to take the appliance to pieces or open it.

• Never cover the air box on the back of the appliance The air has to able to circulate.

• Never immerse the motor block in water! Short-circuit danger! Do not put any cloth or napkins underneath the appliance to avoid endangering by fire and electric shocks.

• Do not use the appliance in moist and wet areas.

• Check the power cord regularly for wear and damage.

• Never clean or operate the appliance or parts of the appliance with abrasive or hard sharp-edged items Never put the appliance or parts of the appliance in the dishwasher for cleaning!

• Do not use the appliance if it is damaged or parts of the appliance are damaged Do not use the appliance if it does not function properly or if it was excessively loaded The appliance is likely damaged if the appliance or parts of the appliance show cracks exorbitant wearing down alterations or leaks It is also likely damaged if the drive wheel of the motor housing moves slowly Take the appliance for technical maintenance and repair to an authorized service centre.

• Never use force assembling or disassembling the appliance The single parts should be easily put together Only operate the mincer after it has been carefully assembled

• Never use the crossed-blade knife and grinding disc in combination with the chopper attachments.

Only use either the crossed-blade knife with the grinding disc or the chopper attachments at once.

• For the case that the worm housing or the closing ring loosen while operating turn off the appliance immediately and pull the plug Operate according to the instructions

“Troubleshooting” before turning the appliance on again.

• Always turn the appliance off wait for the motor to stop moving and then pull the plug before disassembling the mincer.

• Never push the food into the feeding tube with your fingers Always use the feedstick for this purpose! The mincer can not mince hard or stingily ingredients (for example: bones nuts ginger) If you use hard ingredients like onions or carrots you have to steam them before adding them to the meet otherwise they can block the motor If the motor is blocked turn off the appliance immediately and operate according to the instructions

›Troubleshooting‹.

• Before the mincer is used for the first time all parts – with the exception of the motor block – must be thoroughly cleaned in warm soapy water.

• To ensure that the mincer does not seize never operate it under excessive pressure.

• Instantly switch off the mincer if the worm or knife get blocked by a hard object and wait for approx 6 seconds to be certain that the motor is no longer running

Switch on the mincer after it has been cleaned.

• Never use force operating the appliance to avoid damage of the units of the appliance.

• Never hold your face or other body parts over the feed tube when the motor is running because little pieces of food could be thrown out of the feed tube.

• Take care handling the crossed-blade knife because it is very sharp.

• Never put foreign substance or hard objects into the feed tube.

• Never repair the mincer yourself If you discover or suspect a fault send the mincer immediately to an authorised service centre for competent examination and repair.

• Store and use the appliance in a clean frost free environment where it is protected from dampness moistness and immoderate and extraordinary burden (such as: downfall beat overheating moisture in the motor block).

Important safeguards for electrical appliances

The appliance is driven electrically Place the appliance near a suitable wall power socket to connect the appliance directly to a protected mains power supply with protective conductor (earth/ground) connected properly Ensure that the voltage rating of your mains power supply corresponds to the voltage requirements of the appliance (220-230 V 50 Hz rated for at least 8 A).

The installation of a residual current operated circuit breaker (r.c.c.b.) with a maximum rated residual operating current of 30 mA in the supplying electrical