Инструкция по эксплуатации Saturn ST-EK8034 — страница 4

3.First boiling Pour water in a thermo pot to a mark "FULL" and close a cover Attention: In order to avoid a device overheat it is not recommended to pour less than 0.5 I of water and above mark FULL In avoidance boil regularly add water.

4.Connect a food cord in the socket The thermo pot will join automatically; the boiling indicator red colour thus will light up.

5.After water has begun to boil also a teapot has passed in a "Keep warm"
mode and the indicator of green colour has lighted up press button "PRESS" and merge in such a way half of water.

6.Then disconnect a power supplies having taken out a plug from the socket disconnect a cord uncover and merge the remained water as is shown in drawing.

7.After that the teapot-thermos can use in a usual mode Pour fresh water to mark FULL and connect a power cord in a network The teapot-thermos will join automatically the boiling indicator red colour thus will light up.

8.Keep warm At boiling of water the teapot-thermos will be switched in a mode of maintenance of temperature automatically the indicator boiling will go out and the indicator of maintenance of temperature of green colour will light up ATTENTION:
Your teapot-thermos is equipped by system “switching-off at an insufficient quantity of water”. If in the device is not present or not enough water it will automatically shut off.

9.3 ways of boiling:
After the indicator of boiling red colour will go out and the indicator of maintenance of temperature of green colour will light up can start to boil hot water lips having established a cup under a nose. 1 Press and keep button PRESS until then while the cup not to be filled with water. 2 Bring a cup to a nose of the device and press cup edge the button of flood of water. 3 Pressing the button of mechanical flood of water.

10.Reboil Temperature of automatic heating of water below boiling temperature If necessary if you want the teapot-thermos allows finishing water to boiling quickly For this purpose push button «REBOIL».

III CLEANING

Before device clearing disconnect it from the electric plug and merge all water It is