Инструкция по эксплуатации Saturn ST-EK8034 — страница 3

If you want to disconnect appliance from socket (in case of prolonged non-using) then the power cord is disconnected with dry hands directly by plug itself and not the wire Otherwise it can result in rupture of cable or electric shock Disconnect appliances from socket after use as well as during cleaning or movement.

Do not lay the power cord near sharp corners and edges close to sources of heat (stoves gas or electric fryers) Do not immerse into water appliance itself power cord or plug This can lead to malfunctions which are not covered by guarantee.

It is prohibited to use the appliance and packing materials for children games Do not leave small children unattended near the appliance during its operation Keep appliance in place inaccessible for children.

Do not allow to use appliance to people with limited physical or mental capabilities (including children) before instructions for safe use of the appliance is explained to them and is understood by them The appliance may be used 12 only under supervision of adults Do not leave the appliance connected to the mains without attendance.

It is prohibited to use appliance outdoors There is a danger of fault due to rain or other weather conditions.

To provide safety during connecting to the mains the appliance should be grounded The appliance should be connected only to grounded sockets Otherwise the appliance will not correspond to the requirements of protection against electric shock.

Watch that the cord will not twist and bend over the edge of table children contact it or stumble over it Place appliance only upon dry even surface Also observe generally accepted safety rules during work with appliance.

It is prohibited to use appliance in case of any malfunctions If it is faulty or functions incorrectly disconnect it from mains taking plug out of the socket and address the authorized service center.

Unassisted repair or modification of appliance is prohibited All works related to maintenance and repair should be carried out by authorized service center The work carried out unprofessionally can lead to fail injuries and property damage.

Use the appliance for intended purpose; it is prohibited to use it for goals not described in the present manual Do not use the appliance in reservoirs that are subjected to direct heating; and it is prohibited to pour boiling liquid into bowls.

The appliance may be used only when it is completely assembled The appliance is to be used in domestic conditions; the appliance is not designed for industrial use.

Before cleaning the appliance make sure that it is disconnected from the mains and the appliance's

components rotation has stopped completely Always keep the appliance clean Keep this Manual so you can use it in the course of consequent operation.

Use soapy water sponge or soft fabric Tor cleaning of the appliance Do not use chemical and abrasive agents for cleaning.

Do not touch hot details of a teapot during its work or at once at the work termination It can lead to a bum.

Do not use any other network cords except a cord which is delivered complete with the electro device and also do not use this cord for other electric devices.

If the electro device is not used take out a plug of a network cord from the electric socket Default of this requirement can lead to traumas bums defeat by an electric current or to current leak owing to damage of electric isolation.

BEFORE USE 1 Carefully take the thermo pot out of the box 2 Remove all packing materials including various stickers. 3 Clean the frame and base of the kettle with wet cloth then let it dry Before the first use fill and boil the water Than pour off the water and repeat this action two times.

II OPERATION OF THE KETTLE

1.Establish the device on an equal surface and insert a plug into the socket At installation watch that hot steam at thermo pot boiling did not get on furniture home appliances walls etc.

2.Opening removal and cover installation. 1 Lift the handle of opening of a cover. 2 Open a cover upwards Keep the handle of opening of a cover in the top position press the button of removal of a cover and uncover at an angle upwards For cover installation into place execute actions for cover removal in return sequence For cover closing press it from above before click.