Инструкция по эксплуатации Saturn ST-EC0189 — страница 3

DESCRIPTION

B ottom cover

C ontrol panel

H ot plate

T op cover

CONTROL PANEL

FUNCTION INSTRUCTION

1.Press “ ” button to start the unit

LED display will show “00”.

2.Heating function setting: press

FUNCTION button once LED will displays corresponding P8 as the default power is 1800W and the

HEAT indicator will light up it means entering heating mode and power can be adjust by pressing

” or “

” button to the following value: P1(400W)-

P2(600W) P3(800W) P4(1000W)-

P5(1200W) P6(1400W)-

P7(1600W)-P8(1800W).

3.Warming function setting: press

FUNCTION button again LED displays H6 as the default temperature is 240℃ and the

WARM indicator will light up it means entering warming mode and the warming temperature can be set by pressing “

” or “

” button to the following value:H1(60℃)-H2(100℃)-

H3(140℃)-H4(180℃)-H5(220℃)-

H6(240℃).

4.Timer function setting: under mode of HEAT or WARM press TIME button once to enter timer setting which is used for setting the time to shut off the power at this time the

LED displays 10 the default time is 10 minutes.

1 Within 5s press “

” or “

” button to set time the maximum set time is 99 minutes.

2 The “ ” and “ ” buttons can be hold down to scroll through the digits or pressed and released to advance one digit at a time.

Note: If the time is not adjusted within 5s the time setting will be finished 3 Press the TIMER button to confirm the time and buzzer sound will be heard.

5.The unit will stop automatically when no button is pressed within 2h.

OPERATION 1.

Insert power cord into a separate appropriate socket and buzzer sound will be heard once LED display will show “ ” indicating the unit is powered.

2.Place the pan on the center of the hot plate.

3.Press “ ” button LED display will show “00”.

4.Press the FUNCTION button once

LED display will show corresponding setting and at the time the fan starts running the default power of left unit is P8 (1800W) which can be adjusted by pressing “

” or

” button the LED display shows “E0” if the pan is not placed in position and buzzer sound will be heard at an interval of 3 second

The appliance will return under the standby mode immediately if you place the pan in position within 60s if you do not place the pan in position within 60s after 60s the appliance will also return under standby mode.

5.Press FUNCTION button again to enter WARM setting The default temperature is 240°C the LED display shows “H6”，which can be adjusted by pressing “ ” or “ ” button when the temperature rises to the set value the program will enter the automatic protection

Note: you can reset the function by pressing FUNCTION button at any time during operation.

6.Under mode of HEAT or WARM you can set the time to shut-off the power by pressing TIME button.

1 After timing power and time will cycle to display You can adjust the power by pressing 6

” or “

” button.

2 After timing press “

” or

” button to adjust the temperature temperature and time will cycle to display.

Note: under timing shut-off mode the unit can be shut off by pressing

“ ”button after being shut off the timing shut-off setting will be cancelled and at the next start the previous set time will not be saved.

7.When time runs out the unit will stop operating automatically and all indicators will be extinguished

Note: the operation process can be terminated at any time by pressing the “ ” button When cooking program is ended the integrated cooling fan will continue running for 60 seconds.

8.After cooking unplug the mains cord from the power outlet.

OPERATION PRINCIPLE

The operation principle of induction cooker is achieved by the current produced by magnetic field induction which electron circuitry board produces alternate magnetic field when the pan bottom containing metal material is placed on the hotplate the pan will immediately cut the alternate magnetic field and then the metal part of pan bottom produces the current (whirlpool) it makes iron molecule run irregularly at high speed following the collision and friction between molecules produce heat energy which makes the appliance heat promptly so that the purpose of cooking food is achieved.

PRODUCT ADVANTAGE 1.

High efficiency saving energy and environmental protection: cooker body is heating part itself so heat efficiency is very high and save energy greatly when cooking food with induction cooker there is no visible fire smoke and waste gas bear environment protection effect safe and clean.

2.Wider applicable voltage range: the unit can adjust automatically the wattage according to the power voltage so that it avoids the trouble resulting from voltage fluctuation.

3.Perfect safety protection function: the unit has safe protection function for over voltage lower voltage or sudden voltage change However normal over temperature function is quick and accurate.

4.Accurate and perfect inspection for pan quality and no-load protection function: the unit can inspect whether the material or size of pan is applicable When the pan is moved away the unit stops heating immediately and after 10s the power is cut off No matter how the pan is moved away quickly or slowly it causes no damage to induction cooker.

5.Start self-diagnosis function and 2h timing shut-off function: it can define whether induction cooker operation are appropriate that induction cooker is not being operated for long time and will be considered forgotten it will shut of the power automatically after 2h so it makes using it safely.

6.Multi-section wattage adjustment and multi-section temperature control: convenient and agile use in addition temperature control compensation feature makes setting the temperature more exact.

7.Multi-heating function: perform different cooking demand according to different power.

SAFETY PROTECTION EQUIPMENT

1.Over voltage protection and lower voltage protection When power voltage is too high or low induction cooker will compensate voltage automatically and adjust output power.

2.Small metal part protection For small iron metal parts which diameter is less than 80mm no power is outputted to avoid abnormal heating.

3.No pan or improper pan protection

When no utensil is placed on the hotplate or the utensil is deviated greatly from the center or the material of the utensil is not applicable the power will not be output and buzzer sound will be heard to alert until appropriate utensil is put in place.

4.Over temperature protection.

When the temperature of top hotplate is too high induction cooker will stop automatically power output and long buzzer sound will be heard to alert until the temperature returns to normal.