Инструкция по эксплуатации Saturn ST-CC0210 — страница 2

IRON

Dear Buyer!

We congratulate you on having bought the device under trade name “Saturn” We are sure that our devices will become faithful and reliable assistance in your housekeeping.

Avoid extreme temperature changes Rapid temperature change (e.g when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on In this case leave the unit at room temperature for at least 1.5

hours before switching it on.

If the unit has been in transit leave it indoors for at least 1.5

hours before starting operation.

Please read these instructions carefully and familiarize yourself with your new dry spray iron before first use.

1.Handle

2.Body

3.Heat insulating plate

4.Soleplate

5.Temperature dial

6.Indicator light

7.Power cord

IMPORTANT SAFEGUARDS

PLEASE READ CAREFULLY –

ALWAYS MAINTAIN SAFETY,

WHEN WORKING WITH ANY

APPLIANCE.

· Check that the mains voltage corresponds with the rating of the appliance before operating.

· Do not touch hot surfaces – use handles or knobs.

· To protect against electric shock do not immerse cords plugs or appliances in water or any other liquid.

· Do not leave any appliance unattended while it is operating.

· Close supervision is necessary when any appliance is used by or near children or infirm persons.

· Unplug from outlet when not in use or before cleaning Allow to cool before putting on or taking off any parts.

· Do not operate the appliance with a damaged cord or plug or after the appliance has been damaged in any manner If the supply cord or appliance is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

· Do not let the cord hang over the edge of a table or counter or let it come into contact with any hot surfaces.

· Do not use this product for anything other than its intended use This appliance is for household use only.

· No liability can be accepted for any damage caused by noncompliance with these instructions or any other improper use or mishandling.

· The iron should always be turned to

“min” before plugging or unplugging from the mains outlet Never pull the cord to disconnect from the mains:

instead grasp plug and pull to disconnect.

· Burns can occur from touching hot metal parts hot water or steam use caution when you turn a steam iron upside down – there may be hot water in the reservoir.

· If the iron is not operating normally disconnect from the power supply and contact the nearest authorized service agent.

· Your iron is designed to rest on the heel Do not leave the iron unattended when switched on Do not place the iron on an unprotected surface even if it is on its heel rest.

OPERATION

DRY IRONING

The iron heats up faster than it cools down Therefore begin by ironing the items that require a lower temperature (synthetic fibre and silk)

and then iron items of material that requires a higher heat (wool cotton jute etc.)

Insert the plug into the electrical outlet Turn the temperature control to