Инструкция по эксплуатации Samsung TV — страница 11

English 9

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.

Channel mode

P (Programme mode): When completing tuning the broadcasting stations in your area have been assigned to position numbers from P00 to P99 You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Cable Search Option (depending on the country)

Using this function you can manually add the channel range to be scanned by Full Search mode of the Auto Store function.

Frequency (Start ~ Stop): Displays the frequency for the channel.

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

Now & Next Guide Full Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters Programme entries may appear blank or out of date as a result of the information broadcast on a given channel The display will dynamically update as soon as new information becomes available.

For detailed procedures on using

Now & Next Guide and Full Guide refer to the descriptions on page 10.

You can also display the guide menu simply by pressing the

GUIDE button (To configure the Default Guide refer to the descriptions.)

Now & Next Guide For the six channels indicated in the left-hand column displays the Current programme and the Next programme information Full Guide Displays the programme information as time ordered One hour segments Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

Default Guide → Now & Next Guide Full Guide

You can decide whether to display either the

Now & Next Guide or the Full Guide when the GUIDE button on the remote control is pressed

Channel List

For detailed procedures on using the

Channel List refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the

CH LIST button on the remote control.

Channel Mode

When press the

P >/

Added Ch Channels will be switched within the memorized channel list Favourite Ch Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted you may have to fine tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning select

Reset by pressing the ▲ or ▼ button and then press the ENTERE button

Only Analogue TV channels can be fine tuned.

N N

N N

BN68-01893F-Eng.indd 9

2009-02-24 �� 2:57:20