Инструкция REMS Е-Пуш 115500 — страница 5

Инструкция

PDF

1,16 МБ

Инструменты / Контрольно-измерительные приборы

NikaDoc590

Инструкция для REMS Е-Пуш 115500 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

deu eng

7. REMS Vertrags-Kundendienstwerkstätten

Firmeneigene Fachwerkstatt für Reparaturen:

SERVICE-CENTER

Neue Rommelshauser Straße 4

D-71332 Waiblingen

Telefon (07151) 56808-60

Telefax (07151) 56808-64

Wir holen Ihre Maschinen und Werkzeuge bei Ihnen ab!

Nutzen Sie in der Bundesrepublik Deutschland unseren Abholservice.

Einfach anrufen unter Telefon (07151) 56808-60.

Oder wenden Sie sich an eine andere autorisierte REMS Vertrags-Kundendienst-

werkstatt in Ihrer Nähe.

Teileverzeichnis siehe www.rems.de unter Downloads.

Translation of the original operating instructions

General Safety Rules

WARNING! To reduce the risk of injury, user must read and understand instruc-

tion manual.

WARNING! Read all instructions. Failure to follow all instructions listed below may

result in electric shock, re and/or serious injury. The term „power tool“ in all of the

warnings listed below refers to your mains operated (corded) power tool or battery

operated (cordless) power tool, also machines and electric units. Only use the power

tool for the purpose for which it was intended, with the due attention to the general

safety and accident prevention regulations.

SAVE THESE INSTRUCTIONS.

A) Work area

a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the pres-

ence of ammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distrac-

tions can cause you to lose control.

B) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodi-

ed plugs and matching outlets will reduce risk of electric shock. If the power tool

comes with an earthed wire, the plug may only be connected to an earthed

receptacle. At work sites, in damp surroundings, in the open or in the case of

comparable types of use, only operate the power tool off the mains using a 30

mA fault current protected switch (FI breaker).

b) Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplug-

ging the power tool. Keep cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

C) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the inu-

ence of drugs, alcohol or medication. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection. Safety equipment such

as dust mask, non skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the off position before

plugging in. Carrying power tools with your nger on the switch or plugging in

power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

h) Only allow trained personnel to use the power tool. Apprentices may only

operate the power tool when they are over 16, when this is necessary for their

training and when they are supervised by a trained operative.

D) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before making any adjustments,

changing accessories, or storing power tools. Such preventive safety meas-

ures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

Fig. 1

1 Switch

2 Suction hose

3 Connecting piece to the suction hose

4 Suction lter

5 High-pressure hose

6 Connecting piece to the

high-pressure hose

7 „Test“ stop valve

8 „Press“ pressure-regulating valve

9 Manometer

10 Connecting piece with mano-

meter and stop valve (accessory)

11 Screws

12 Plug ttings made of plastic material

Скачать «REMS Е-Пуш 115500» — 1,16 МБ СкачатьСкачиваний: 0

Инструкция REMS Е-Пуш 115500 — страница 5

Другие руководства из этой категории