Инструкция PHILIPS HU4803 — страница 9

Инструкция

PDF

9,84 МБ

Климатическая техника

MiraReader

Инструкция для PHILIPS HU4803 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

7EN

English

Water level

When there is not enough water in the water

tank, the appliance will work in the following

ways.

• The water level drops and the red

indicator light starts blinking (g. e).

• The humidier continues to work for 30

minutes and then stops working, the red

indicator light remains on.

The appliance will resume work when you rell

water into the water tank.

Note

• If the water tank is empty when the humidier is

plugged in and switched on, the red indicator

light blinks for 2 minutes and then remains on

before the water tank is relled with water.

• It is normal to nd some water left in the tank.

Rellwater

Water level can be observed through the

transparent water tank window.

1 Switch off the humidier and unplug it.

2 Remove the upper unit by holding it at

both sides (g. b).

3 Fill the water tank with cold tap water

until water reaches the maximum water

indication level (g. c).

Note

• When lling water, do not exceed the maximum

water level, or water might leak from the drain

hole and air inlets.

• Do not shake the water tank when moving it,

or water might leak from the drain hole and air

inlets.

• Do not ll water through the air outlets on top

of the humidier.

4 Place the upper unit back onto the water

tank.

Set the timer

With the timer function, you can let the

humidier operate for a set number of hours.

When the set time has elapsed, the humidier

automatically switches off.

1 Press the timer button once or more

times to choose the number of hours you

want the humidier to operate (g. j).

» The corresponding timer light (1H, 4H

or 8H) goes on.

To deactivate the timer function, press the timer

button repeatedly until the timer light turns

off.

Set the humidity level

Note

• Make sure that the water tank is lled with

water before the humidier can function (see

the chapter 'Get started', section 'Prepare for

humidication').

1 Press the humidity button once or

more times to set the desired air humidity

to 40RH%, 50RH% or 60RH% (g. k).

» The humidity light (40, 50 or 60) of the

humidity level goes on.

» The ambient humidity level displays on

the center of the control panel.

Tip

• A comfortable humidity level is from 40RH% to

60RH%. You can choose the preferred humidity

level at 40%RH, 50%RH or 60%RH..

Note

• If no preset humidity level is selected, the

humidier will stop working when the humidity

level reaches 50RH% in the auto mode and

70RH% in other modes.

Скачать «PHILIPS HU4803» — 9,84 МБ СкачатьСкачиваний: 0

Инструкция PHILIPS HU4803 — страница 9

Другие руководства из этой категории