Добавить

Инструкция PHILIPS HU4803 — страница 8

Инструкция ФорматPDF Размер9,84 МБ Страниц62 КатегорияКлиматическая техника ДобавилMiraReader

Инструкция для PHILIPS HU4803 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 62
Вперёд →
6 EN
Tip
• If the desired humidity level is reached, the
humidier changes to a lower fan speed
automatically.
• In AUTO mode, the fan speed changes between
and .
Manual
You can manually select the desired fan speed.
1 Press the speed button once or more
times to select the desired fan speed
(AUTO, , or ) (g. h).
» The selected fan speed light goes on.
Tip
• If the desired humidity level is reached, you can
select a lower fan speed. However, if the desired
humidity level is not reached, you can select
a higher fan speed to humidify the air more
quickly.
Sleep mode
In sleep mode, the humidier operates quietly
with dimmed light for your undisturbed sleep.
1 Press the speed button once or more
times to select sleep mode (g. i). In
sleep mode, only the speed light is on.
2 To change to another fan speed, simply
press the speed button again.
Note
• Sleep mode only works at speed .
• In sleep mode, the red indicator does not blink,
but remains on when the water level gets low.
• In sleep mode, you can only set the timer; the
humidity level cannot be set, and the humidity
light is off.
Switchthehumidieronandoff
1 Put the plug of the humidier into the wall
socket.
2 Press the power button to switch on
the humidier (g. f).
» The current humidity level and fan
speed display on the screen.
3 Press the power button to switch off the
humidier.
Note
• If the water level in the tank is getting very
low, the humidier stops humidifying. The red
indicator light rst starts blinking and then
remains on.
• The humidier releases very ne invisible mist,
so it is normal that you cannot see the mist.
Change the fan speed
Auto
The auto mode uses the digital sensor to con-
stantly monitor the air humidity. It turns your hu-
midier on and off whenever needed to ensure
the humidity level is constantly at the right level.
The default humidity level of the auto mode
is set at 50RH%, but you can change it to the
humidity level you need under the auto mode.
Next time when you switch on the humidier, it
will remember your last set humidity level, unless
you have removed the plug from the wall socket.
In this case the default humidity level is set at
50RH% again.
1 Press the speed button to select the
auto mode (g. g).
» The AUTO speed light goes on.
Скачать «PHILIPS HU4803» — 9,84 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?