Добавить

Инструкция INVOLIGHT BATBAR230 — страница 5

Инструкция ФорматPDF Размер0,28 МБ Страниц7 КатегорияСценическое оборуд. ДобавилМилаDoc252

Инструкция для INVOLIGHT BATBAR230 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 7
Вперёд →
Pr.11
120~131
Pr.12
132~143
Pr.13
144~155
Pr.14
156~167
Pr.15
168~179
Pr.16
180~191
Pr.17
192~203
Pr.18
204~215
Pr.19
216~227
Pr.20
228~239
Sound
240~255
5. Colr Mode
This mode is dimming mode, press SETUP to dim the static color, press UP and DOWN buttons could set
r.000~r.255, g.000~255, b.000~b.255.
6. Sound-active Mode
1) Press the “MODE”, enter into sound-active mode “Sound Mode ”.
2) Press “SETUP” button enter to set the sound sensitivity. Press the “UP” or “DOWN”, to set the sound-active
sensitivity value “00-31”.
7. Power Charge Mode
This mode is available when battery is charging.
Press the “SETUP” button to see the power percentage 0~100.
C. Lithium Battery Instruction
1. The battery is 11.1V, 6.6Ah which is brand of 18650 Lithium Battery. It will take 3.5 hours to be fully charged
and it can be use for 6 hours. Please operate this product in the right way and discharge it. Please don’t let the
fixture spare for long time, should use and charge time by time.
2. The battery capacity display will show the product is on, fully charge or low battery. While you are using it and
charging it, the fixture will be turned off and it is fully charge. The five LED instruct lights respect the battery is
100%~80%, 60%, 40%, 20%, 20%~0%. Please charge the fixture timely when the red LED instruct light flash
because it means the battery is less than 20%.
3. Please don’ t let the fixture spare for a l long time. This fixture should be charged every three or six months at
least one time.
4. Do not use this fixture in high temperature for long time, or the lithium battery would be fire, lose function or
reduce life
D. IR Specification
Warmth warning: when you use the IR to, you need to keep the IR aiming at the light for flexible control.
However, the IR will be useless when the mode turns to “DMX mode” and Master/Slave Mode”.
1. ON/OFF
2. AUTO
Press “AUTO” button and the fixture will enter into Auto Running Mode.
3. PRG
Press “PRG” button and the fixture will enter in Built-in Programs.
Press “+” or “-”button to select built in programs segment ~ .
Скачать «INVOLIGHT BATBAR230» — 0,28 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?