Инструкция INVOLIGHT AD1000 — страница 13

Инструкция

PDF

0,97 МБ

Сценическое оборуд.

OlegLab703

Инструкция для INVOLIGHT AD1000 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

4. Controlling fixtures

4.1 Select fixtures

 Select a single fixture: Press the handle Fixture buttons for the

fixtures you want. The LED in the Fixture button comes on for selected

fixtures

 Select a range of fixtures: To select a range of fixtures, hold down

the Fixture button for the first fixture then press the Swop button for the

last fixture.

 Stepping through selected fixtures one at a time: If you have

selected a range of fixtures, our console has functions to step through

the selected fixtures one at a time. This can make it easier to program

a range of fixtures because you don’t have to select each one manually.

Pressing <> or <> in “Fixture control area”, it will select the fixtures

in the range one at a time. If <HiLight> button is activated, The

selected fixture from the range will light up, and the other fixtures will

go out.

 Activate previously selected fixtures: To activate all the previously

selected fixtures, press <All> in “Fixture control area”.

 Select fixtures at odd positions: Press <Odd>, the fixtures at odd

positions of the selected fixtures will keep selected, but, those at even

positions will be de-selected. This is related to the order that you

selected the fixtures before pressing <Odd>.

 Select fixtures at even positions: Press <Even>, the fixtures at

even positions of the selected fixtures will keep selected, but, those at

odd positions will be de-selected. This is related to the order that you

selected the fixtures before pressing <Even>.

4.2 Modify an attribute value

1) Select a fixture.

2) Select an attribute. Then, use <Wheel A> and <Wheel B> to adjust the

value. Or, switch to Attribute mode to adjust the attribute value by

faders.

3) To see the output values, press <Output>.

4.3 Advanced options

 Locate fixtures: Select fixtures; Press <Locate> in “Fixture control

area” to locate the fixtures. Fixture locating is provided in the fixture

library.

 Align fixtures: Select fixtures; Press <ML> in “Fixture control area”

then <A>, all the attribute values of all the selected fixtures will be

aligned to the first fixture.

 Align attributes: Select fixtures and select attributes; Press <ML> in

Скачать «INVOLIGHT AD1000» — 0,97 МБ СкачатьСкачиваний: 0

Инструкция INVOLIGHT AD1000 — страница 13

Другие руководства из этой категории