Инструкция HITACHI CC14ST — страница 9

Инструкция

PDF

2,26 МБ

Инструменты / Контрольно-измерительные приборы

AlexUser29

Инструкция для HITACHI CC14ST на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

English

● Information about power supply system of nominal

voltage 230 V~

Under unfavorable mains conditions, this power tool

may cause transient voltage drops or interfering voltage

ﬂ uctuations.

This power tool is intended for the connection to a power

supply system with a maximum permissible system

impedance Z

MAX

of 0.14 Ohm at the interface point (power

service box) of the user’s supply.

The user has to ensure that this power tool is connected

only to a power supply system which fulﬁ lls the requirement

above.

If necessary, the user can ask the public power supply

company for the system impedance at the interface point.

● Information about power supply system of nominal

voltage 230 V~

This tool should be used only if it is connected to a 16 A

Fuse with gl disconnection characteristic.

7. Service parts list

CAUTION

Repair, modiﬁ cation and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized Service

Center.

This Parts List will be helpful if presented with the tool to

the Hitachi Authorized Service Center when requesting

repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modiﬁ ed to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without prior

notice.

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country speciﬁ c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or normal

wear and tear. In case of complaint, please send the Power

Tool, undismantled, with the GUARANTEE CERTIFICATE

found at the end of this Handling instruction, to a Hitachi

Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

Information concerning airborne noise and vibration

The measured values were determined according to

EN61029.

The typical A-weighted sound pressure level: 95 dB (A).

The typical A-weighied sound power level: 108 dB (A).

Wear hearing protection.

Vibration total values (triax vector sum) determined

according to EN61029.

Cutting steel bar:

Vibration emission value

ah = 5.0 m/s

Uncertainty K = 1.5 m/s

The declared vibration total value has been measured in

accordance with a standard test method and may be used

for comparing one tool with another.

It may also be used in a preliminary assessment of exposure.

WARNING

○ The vibration emission value during actual use of the

power tool can diﬀ er from the declared value depending

on the ways in which the tool is used.

○ Identify safety measures to protect the operator that

are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched oﬀ and when it is running idle in addition to the

trigger time).

Скачать «HITACHI CC14ST» — 2,26 МБ СкачатьСкачиваний: 0

Инструкция HITACHI CC14ST — страница 9

Другие руководства из этой категории