Инструкция HITACHI CC14ST — страница 6

Инструкция

PDF

2,26 МБ

Инструменты / Контрольно-измерительные приборы

AlexUser29

Инструкция для HITACHI CC14ST на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

English

(Original instructions)

GENERAL OPERATIONAL PRECAUTIONS

WARNING! When using electric tools, basic safety

precautions should always be followed to reduce the risk

of ﬁ re, electric shock and personal injury, including the

following.

Read all these instructions before operating this product and

save these instructions.

For safe operations:

1. Keep work area clean. Cluttered areas and benches

invite injuries.

Consider work area environment. Do not expose power

tools to rain. Do not use power tools in damp or wet

locations. Keep work area well lit.

Do not use power tools where there is risk to cause ﬁ re or

explosion.

3. Guard against electric shock. Avoid body contact with

earthed or

grounded surfaces (e.g. pipes, radiators,

ranges, refrigerators).

4. Keep children and inﬁ rm persons away. Do not let visitors

touch the tool or extension cord. All visitors should be

kept away from work area.

5. Store idle tools. When not in use, tools should be stored

in a dry, high or locked

up place, out of reach of children

and inﬁ rm persons.

6. Do not force the tool. It will do the job better and safer at

the rate for which it was intended.

7. Use the right tool. Do not force small tools or attachments

to do the job of a

heavy duty tool. Do not use tools for

purposes not intended; for example, do not use circular

saw to cut tree limbs or logs.

8. Dress properly. Do not wear loose clothing or jewelry,

they can be caught in moving parts. Rubber gloves and

non-skid footwear are recommended when working

outdoors.

Wear protecting hair covering to contain long

hair.

9. Use eye protection. Also use face or dust mask if the

cutting operation is dusty.

10. Connect dust extraction equipment.

If devices are provided for the connection of dust

extraction and collection facilities ensure these are

connected and properly used.

11. Do not

abuse the cord. Never carry the tool by the cord or

yank it to disconnect it from the receptacle. Keep the cord

away from heat, oil and sharp edges.

12. Secure work. Use clamps or a vise to hold the work. It

is safer than using your hand and it frees

both hands to

operate tool.

13. Do not overreach. Keep proper footing and balance at all

times.

14. Maintain tools with care. Keep cutting tools sharp

and clean for better and safer performance. Follow

instructions for lubrication and changing accessories.

Inspect tool cords periodically and if damaged, have it

repaired by authorized

service center. Inspect extension

cords periodically and replace, if damaged. Keep

handles dry, clean, and free from oil and grease.

15. Disconnect tools. When not in use, before servicing, and

when changing accessories such as blades, bits and

cutters.

16. Remove adjusting keys and wrenches. Form the habit

of checking to

see that keys and adjusting wrenches are

removed from the tool before turning it on.

17. Avoid unintentional starting. Do not carry a plugged-in

tool with a ﬁ nger on the switch. Ensure switch is oﬀ when

plugging in.

18. Use outdoor extension leads. When tool is used

outdoors, use only extension cords intended for outdoor

use.

19. Stay alert. Watch what you are doing. Use common

sense. Do not operate tool when you are tired.

20. Check damaged parts. Before further use of the tool, a

guard or other part

that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, free running of moving parts, breakage

of parts, mounting and any other conditions that may

aﬀ ect its operation. A guard or other part that

is damaged

should be properly repaired or replaced by an authorized

service center unless otherwise indicated in this handling

instructions. Have defective switches replaced by an

authorized service center. Do not use the tool if the

switch does not turn it on and oﬀ .

21. Warning

The use of

any accessory or attachment, other than

those recommended in this handling instructions, may

present a risk of personal injury.

22. Have your tool repaired by a qualiﬁ ed person.

This electric tool is in accordance with the relevant safety

requirements. Repairs should only be carried out by

qualiﬁ ed persons using

original spare parts. Otherwise

this may result in considerable danger to the user.

PRECAUTIONS ON USING CUT-OFF MACHINE

1. Inspect the cutting wheel before use, do not use chipped

or otherwise defect cutting wheels. Always make a trial

run before use to conﬁ rm that the Cut-oﬀ Machine does

not involve abnormalities.

2. Use the normal cut-oﬀ wheel on its normal working

surface.

3. Guard against cut-oﬀ sparks.

Properly replace the cut-oﬀ wheel.

5. Always pay attention that the cut-oﬀ wheel clamping

parts are never impaired. Defective parts will cause

damage to the cut-oﬀ wheel.

6. Ensure that the workpiece is free of foreign matter such

as nails.

7. Use only cutting wheels recommended by the

manufacturer which

have a marked speed equal to or

greater than the speed marked on the nameplate of the

machine.

8. Abrasive wheels shall be stored and handled with care in

accordance with manufacturer’s instructions.

9. Ensure that mounted wheel are ﬁ tted in accordance with

the manufacture’s instructions.

10. Do never use the machine

without the guard in place.

11. Do not saw blade.

12. Do not use the machine in explosive atmospheres and

environments where sparks could ﬁ re, explosion etc.

Скачать «HITACHI CC14ST» — 2,26 МБ СкачатьСкачиваний: 0

Инструкция HITACHI CC14ST — страница 6

Другие руководства из этой категории