Инструкция по эксплуатации Gardena T 1030 Plus — страница 5

ФорматФормат: Руководство СтраницСтраниц: 12 КатегорияКатегория: Кухня ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Gardena T 1030 Plus на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 12
Вперёд
Страница 5
In addition to time-based watering it is also possible to include the soil moisture or rain sensor in the watering programs.

If the soil is moist enough the program will be stopped or a program will be prevented from starting Manual operation via man On Off is unaffected by this.

1 Remove controller 4

from the housing of the Water Timer.

2 Place soil moisture sensor in the watered area

– or –
place rain sensor (with extension cable if necessary)
outside the watered area.

3 Insert the sensor in the sensor connection 9

of the Water

Timer.

An adapter cable may be required to connect older sensors which can be purchased from GARDENA Service GARDENA Adapter cable Art No 1189-00.600.45.

To secure your Water Timer against theft you can obtain the GARDENA Anti-theft device Art No 1815-00.791.00 from GARDENA Service.

1 Screw clamp 0

with screw

firmly to the back of the Water

Timer.

2 Use clamp 0

e.g for fixing a chain.

It is no longer possible to remove the screw after it has been screwed in.

5 Operating Your Water Timer

To set the program the controller can be removed and mobile programming can be carried out (see 4 Putting Your Water Timer into Operation

“ Insert battery” ).

Set watering duration :
The watering duration can be set between 1 and 120 minutes in 13 steps.

v Turn Run Time control knob 1

to the required watering duration (e.g 10 minutes).

Set watering frequency :
The watering frequency can be set between 8 hours (8h) and every 7

th day (7th) in 6 steps.

v Turn Frequency control knob 2

to the required watering frequency (e.g every 8 hours = 8h).

Watering start time :
5 seconds after setting the watering frequency the set values are accepted and first watering begins The time at which this happens is the future watering start time.

Fit anti-theft device (optional) :

Connect soil moisture or rain sensor (optional) :

Set watering program :
Нашли ошибку?