Инструкция по эксплуатации Elenberg WM-4515 — страница 11

Prepare

1 The machine should be placed on flat ground 2 This machine requires to use the ambipolar plug to assure the safety of the machine when working Do not connect the ground wire to the water pipe gas pipe heating pipe and so on 3 Lay down the overflow hose (Do not lay down the hose when machine is on up drain function.) 4 Use the water hose to connect the water tap to the water inlet 5 According to the material and weight of cloth adjust the level of water 6 Switch on power

Washing

1 Put the clothes and correct amount of detergent into the tub (Excessive detergent will make it difficult to get rid of the suds and insufficient rinsing may result) 2 Turn on the tap valve inlet water and adjust the water level according to the requirement 3 Set the wash drain-switch to strength or tender according to the material and weight of clothes 4 Set the wash timer knob to the proper position and start to wash.

5 After wash set the wash-drain switch to the drain position to drain off water

Spin-drying

1 After drain off water put the clothes to the right spin-tub and hold down the clothes 2 Put down the safety lid and spin-dry lid in turn 3 Set the spin-dry timer to the proper time according to the clothes

Drain washing 1 After drying inlet water to the spin-dry barrel for 20-30 seconds 2 According to the spin-drying process dry the clothes for 1 minute respin for 1-2 minutes

Rinsing

1 After drying as the spin-dry tub finally stop open the spin-basket safety lid and spin-dry lid in turn take out the clothes to the washing tub and prepare to rinse 2 Besides no more putting the detergent the rinsing process have no difference with the washing process.

NOTE:

Washing and spinning can be operated at the same time.

WASHING INSTRUCTION