Инструкция DEWALT DW 343 K — страница 10

Инструкция

PDF

2,16 МБ

Инструменты / Контрольно-измерительные приборы

SofiaPro49

Инструкция для DEWALT DW 343 K на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

ENGLISH

Setting the pendulum stroke (ì g. A)

The adjustable pendulum stroke guarantees a

perfect cutting stroke for different materials.

Slide the selector (10) to the desired position

referring to the table below. The selector can be

manipulated during operation.

Pos. Wood Metal Plastics

2 Fast cuts - PVC

2 Thick workpieces - Fibreglass

Acrylic

1 Plywood Aluminium -

Chipboard Non-ferrous -

0 Thin workpieces Sheet metal -

Fine cuts

•

Mounting the plastic anti-scratch shoe cover

(ì g. D)

The anti-scratch shoe cover (12) reduces damage

to the surface of (sensitive) workpieces.

Click the cover onto the shoe as shown.

Dust extraction (ì g. E)

Place the dust extraction shroud (14) (optional)

between the ì nger guard (6) until it clicks in place.

Fit the dust extraction adaptor (13) (optional) to

the tool as shown.

Connect the hose of a suitable dust extraction

system to the adaptor.

When appropriate, connect a dust

extraction system designed in

compliance with the applicable

directives regarding dust emission.

Do not use a dust extraction system

without proper spark protection when

sawing metal.

Instructions for use

Always observe the safety instructions

and applicable regulations.

Make sure your workpiece is well secured.

Remove nails, screws and other

fasteners that may damage the blade.

Check that there is sufì cient space for

the blade underneath the workpiece.

Do not cut materials that exceed the

maximum cutting depth of the blade.

Use sharp saw blades only. Damaged

or bent saw blades must be removed

immediately.

Do not use the tool for sawing pipes or

tubes.

Never run your tool without a saw blade.

For optimal results, move the tool

smoothly and constantly over the

workpiece. Do not exert lateral pressure

on the saw blade.

Keep the shoe î at on the workpiece

and lead the cord away in line with the

tool. When sawing curves, circles or

other round shapes, push the tool

gently forward.

Wait until the tool has come to a standstill

before removing the saw blade from the

workpiece. After sawing the blade may

be very hot. Do not touch.

The dust extraction adaptor (13) (optional) in

combination with the dust extraction shroud (14)

(optional) helps extracting the dust from the

workpiece surface, when connected to a suitable

dust extraction system.

Switching on and off (ì g. A)

DW341/DW341K

To run the tool, press the on/off switch (1).

For continuous operation, press and hold down

the switch (1), press the lock-on button (2) and

release the switch.

To stop the tool, release the switch.

To stop the tool in continuous operation, press

the switch brieî y and release it. Always switch

off the tool when work is ì nished and before

unplugging.

•

Скачать «DEWALT DW 343 K» — 2,16 МБ СкачатьСкачиваний: 0

Инструкция DEWALT DW 343 K — страница 10

Другие руководства из этой категории