Инструкция по эксплуатации Bosch Tronic 2000 — страница 11

ФорматФормат: Руководство СтраницСтраниц: 18 КатегорияКатегория: Водонагреватели ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Bosch Tronic 2000 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 18
Вперёд
Страница 11
Safety precautions

^ Risk of electric shock

In the event of a fault switch off the power supply immediately.

• Only have the appliance connected and commissioned by a qualified engineer or by the after-sales service.

• Comply with the legal requirements and the connection requirements of the electricity and water supply companies.

• Country Rules of Electrical Installations Design must be observed when installing the appliance and/or electrical accessories.

• All-pole isolation with a contact opening of at least 3 mm should be fitted on the installation side.

• The flow-through water heater must only be installed in a frost-free area.

• Disassembled appliances must be stored in a frost-free area (residual water).

• The appliance must not be connected if there is a risk that it is frozen.

• Do not allow persons (including children) with reduced physical sensory perception or mental capacity or with a lack of experience and knowledge to operate the appliance unless they are supervised or have received training concerning the use of the appliance from a person who is responsible for their safety.

Keep children away from the appliance Keep children under supervision in order to prevent them from playing with the appliance.

• The hot-water pipe can become hot Warn children about this.

To avoid potential hazards repairs must only be carried out by a qualified engineer.

Before installation disconnect the electric cable from the current and shut off the water pipe.

• First connect the water and then the electrical connection.

• After installation it must not be possible to touch any live parts.
Нашли ошибку?