Инструкция BONECO E2441A — страница 2

Инструкция

PDF

2,85 МБ

Климатическая техника

MiraReader

Инструкция для BONECO E2441A на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Operating light

The operating light illuminates green as soon as the

unit is switched on. If the water base is taken off

the base, the green LED changes to red and unit

operation is interrupted, but the unit is not current-

less. Only when the water base is returned to the

base does the red LED turn green again and the unit

resumes operation.

Power rating plate

The following information is displayed on

the power rating plate:

Product name

Electrical voltage

Power consumption

Protection class

Production number

Production date

Mark of conformityThe data on the power rat-

ing plate in the illustrations is only exemplary.

Please check the data on the power rating plate

of your unit.

Functional principle

When filling the unit, the float switch is lifted with

the water gauge. When the water gauge reaches the

water capacity fill line, the float tip closes the fill-

ing opening of the unit. The evaporator wick soaks

up water. The fan pushes the dry room air through

the moist mat and emits it as sufficiently moistur-

ized air. Through the directed guiding of the airflow,

nearly constant humidification is possible at every

water level. Therefore the unit creates optimum

air moisture, without additional control units being

necessary.

Ionic Silver Stick

for water quality mainte-

nance

The specially adapted anti-microbial protec-

tion system Ionic Silver Stick

prevents microbial

growth in the water in the water base. Therefore no

chemical additives are necessary for water quality

maintenance.

The Ionic Silver Stick

is self-renewing, service free

and can be used for a year.

Lifecycle indicator

The unit is equipped with a lifecycle indica-

tor for the Ionic Silver Stick

. Please cross off the

current month on the label and write the current

year on the line provided.

Unpacking the unit

At delivery the unit is completely assembled and

already equipped with an evaporator wick.

The float body (styrofoam) is a component of

the float assembly and does not belong to the

packaging.

•

B 14B 14

Functional principle

B 4B 4

B 9B 9

npac

ng t

e un

CAUTION

Risk of injury by falling parts!

Always handle the unit by the base when un-

packing and lifting.

Ⴇ

CAUTION

Damage to the unit due to removal of the float

body (styrofoam)!

Do not remove the float body (styrofoam) when

unpacking the unit.

Ⴇ

Open the packaging.

Remove the upper part of the styrofoam

packaging.

Reach into the filling opening and grasp

the upper end of the plastic bag securely.

Carefully pull the plastic bag with the unit

out of the packaging. When doing so, grasp the

plastic bag securely and do not let go of the plas-

tic bag when removing.

Place the plastic bag with the unit on the

floor and push the plastic bag down along the

unit.

Hold the unit by the base and lift up out of

the plastic bag.

All packaging components as well as the plastic

bag are removed from the unit.

Check data regarding the power supply

on the power rating plate.

Check that all components of the unit are

included.

Putting the unit into operation

Positioning the unit

CAUTION

Damage to the plastic due to high tempera-

tures!

Do not expose the unit to temperatures > 50 °C. Ⴇ

Observe the following pointers when positioning the

unit:

Remember to ensure easy accessibility

and sufficient room for servicing and cleaning

the unit.

Only operate the unit when it is filled!

Place the unit on the floor or on a flat, dry surface

in the room.

Fill the unit (see chapter "Filling the unit").

Filling the unit

There are the following possibilities for filling the

unit with water:

using the filling opening on the upper part or

directly into the removed water base from a fau-

cet.

There are no foreign objects in the unit.

The unit is assembled properly.

After an extended period of disuse, the unit

should be emptied and cleaned. Before recom-

missioning, ensure that the unit is clean. Other-

wise an unpleasant odor can result.

ᇒ

•

ᅛ

C 1C 1

C 2C 2

C 3C 3

C 5C 5

C 6C 6

B 14B 14

Puttin

the unit into operation

A 14A 14

Technical data

Value

Electrical voltage 230 V/50 Hz

Power consumption 20 W

Humidity output up to 220 g/h

Suitable for rooms up to 40 m²

Water capacity max. 3.8 l

min. 0.2 l

Dimensions LxWxH 320 x 320 x 400 mm

Weight (empty) 3.8 kg

Operation noise level < 25 dB(A)

Description of the unit

The unit consists of the following components:

Filling opening

Top assembly

Float assembly (B 16–19)

Ionic Silver Stick

(ISS)

Water base (B 5–7)

Water capacity fill line

Base handles

Spout

Lifecycle indicator for the Ionic Silver

Stick

(ISS)

Power cord/plug

Base (B 11–14)

Fan

Slide switch (B 20–21)

Power rating plate (on the underside of

the unit)

The float assembly consists of the following parts:

Float tip

Water level indicator ring (max. 3.8 l)

Evaporator wick A7018

Float basket

Float body (styrofoam)

The slide switch consists of the following parts:

Slide switch

Operating light

Operating modes

The following operating modes can be set on the

slide switch:

Position Function

0 The unit is switched off

I The unit is operating in night mode

(low noise level)

The operating light turns green

II The unit is operating in normal mode

(maximum humidity output)

The operating light turns green

•

echnical dat

escription of the unit

B1B1

B2B2

B3B3

B4B4

B5B5

B6B6

B7B7

B8B8

B9B9

B10B10

B11B11

B12B12

B13B13

B14B14

B15B15

B16B16

B17B17

B18B18

B19B19

B20B20

B21B21

Osteuropa_E2441.indb 4 25.06.2008 11:04:49

Скачать «BONECO E2441A» — 2,85 МБ СкачатьСкачиваний: 0

Инструкция BONECO E2441A — страница 2

Другие руководства из этой категории