Инструкция по эксплуатации Binatone SI-5000 — страница 7

6) When you have finished cleaning or ironing do not forget to switch the iron off Set the Select knob to the position « » and set the Display Fabric Settings (9)

(9) to the position «

» Unplug the appliance from the mains supply outlet.

CARE AND MAINTENANCE

Cleaning of the sole plate

Do not use any abrasive substances and materials to clean the sole plate.

Cleaning of internal parts of the appliance

SI-5000 I-Flash

SI-5000 I-Flash

SI-5000 I-Flash

SI-5000 I-Flash

SI-5000 I-Flash iron is equipped with an anti-scale function which protects it from an accumulation of scale: it does this with a built-in permanent filter Therefore the water hardness is reduced and the useful service life of the iron is extended.

Warning:

In areas with very hard water it is recommended that you regularly remove scale from the appliance to maintain it in good working order Excess lime scale may result in damage or malfunction of your product.

If in your area the water is soft and you have average amounts of clothes to be ironed then we recommend you to de-scale every 6

months (see subsection «Self-Cleaning

Self-Cleaning

Self-Cleaning

Self-Cleaning

Self-Cleaning») If the water in your area is very hard or if you iron frequently then we recommend you de-scale once a month.

Storage

Before storing the iron make sure it is disconnected from the mains supply outlet and is completely cooled down Drain the remaining water from the tank (5)

(5) by opening the cover (4)

(4) and holding the iron upside down over the sink Store the appliance in the upright standing position The recommended storage temperature is from +5 to +50°C.

USEFUL TIPS

Selection of temperature settings

Before ironing we recommend that you organize your clothes into the types of material and the recommended temperature settings.

We recommend that you start ironing using the lower temperature settings first: the appliance gets hot quicker than it cools down.

When ironing articles made with combinations of fibers start with the temperature recommended for the most delicate material first (for example to iron a cloth made of cotton and polyester select the temperature recommended for ironing polyester first).

If the manufacturer’s label which gives the recommended tem-