Инструкция по эксплуатации Binatone SI-4060 — страница 8

ENGLISH

8 Put the appliance into a vertical position and re-heat the iron.
9 To complete the cleaning process; Iron a piece of a clean old cotton cloth in order to clean the sole plate (12) of any remaining dust and scale and to evaporate the remaining water When you have finished ironing always switch the appliance off and disconnect from the electrical supply.

Storage

Before storing the iron make sure it is disconnected from the mains supply outlet and is completely cooled down Set the temperature control knob and the steam control knob into the «0»
position Drain the remaining water from the tank (5) by opening the cover (4) and holding the iron upside down over the sink Store the appliance in the upright standing position.

USEFUL TIPS

Selection of temperature settings

! Before ironing we recommend that you organize your clothes into the types of material and the recommended temperature settings.

! We recommend that you start ironing using the lower temperature settings first: the appliance gets hot quicker than it cools down.

! When ironing articles made with combinations of fibers start with the temperature recommended for the most delicate material first (for example to iron a cloth made of cotton and polyester select the temperature recommended for ironing polyester first).

! If the manufacturer’s label which gives the recommended temperature is missing and the type of material is known follow the recommendations below.

Fabric type

Temperature control settings Steam ironing

Acrylic Polypropylene •

Polyethane Acetate Triacetate Polyester Polyamide

Nylon Viscose Rayon Silk

Not recommended

Wool

Cotton

Linen

! If you do not know the fabric type find a place on the article;

which will not be seen and test iron it to select the appropriate temperature start with the minimum setting.

Ironing of selected fabrics

! Do not use the water spray button (7) while ironing silk articles: drops of water leave spots on silk garments.