Инструкция по эксплуатации Binatone MGR-3040 — страница 5

17 Slicer

18 Shredder

19 Light indicator

20 Power cord storage compartment (picture B)

21 Circuit breaker knob

22 Release button

BEFORE USE

Remove all packing materials from the appliance.

Wipe the housing with damp lint free cloth and wash all parts to be in contact with food.

Rinse the washed parts of the appliance with clean water and completely dry them before assembling.

INSTRUCTIONS FOR USE

Before assembling/dismantling make sure the appliance is turned off and unplugged.

Assembling

1 Insert the screw (8) into feeding container (5).

2 Put the cross-shaped cutter (9) on the end of the screw (8) so that the rounded tip of the cutter (9) is facing the screw (8) Make sure the cross-shaped cutter (9) is properly fixed.

3 Place the selected perforated disc (10) on top of the cutter (9) so that the projection on feeding container (5) fit the slot in the disk.

4 Tighten the feeding container nut (11).

5 To attach feeding container (5) to the housing (1) insert it into the opening in the grinder’s housing and turn anticlockwise until it is properly fastened.

6 Place the tray (6) on top of the funnel of feeding container (5) Now the grinder is ready for operation.

Dismantling

1 Press the release button (22) and turn the feeding container (5) clockwise Remove feeding container (5) from the motor.

2 Untwist the feeding container nut (11).

3 Remove the perforated disk (10) and cross-shaped cutter (9) from the screw (8) Remove the screw (8) from feeding container (5).

HOW TO MINCE MEAT

1 Place the grinder on a dry smooth flat horizontal surface.

2 Remove the meat from the package Cut out all bones and tendons from the meat prior to grinding Cut the meat into pieces that will fit easily into the grinder funnel.