Инструкция по эксплуатации Bang & Olufsen Playmaker - User Guide — страница 5

English

This guide contains information about the installation and daily use of your Bang & Olufsen product

The guide explains how to set it up for use with AirPlay® DLNA® line-in and connected speakers You can set up Playmaker in a wireless network using the BeoSetup App*

your computer or you can connect Playmaker to a wired network for immediate use You can also see how to connect other sources to your Playmaker.

It is possible to set up and synchronise multiple Playmakers in your home Contact your Bang & Olufsen retailer for more information.

You can find more information about Playmaker in the Frequently

Asked Questions (FAQ) section on

Before you connect any equipment to your Playmaker make sure it is disconnected from the mains supply

You must remove the back cover from Playmaker to access the connection panel

> Place Playmaker on a soft cloth with the Bang & Olufsen logo facing downwards

> Remove the table stand (if already mounted)

> Press firmly on the snap hook and lift off the back cover

> Run cables through the enclosed cable cover.*

> Run cables through the hole in the back cover

> Connect Ethernet (optional) line-in (optional) and speakers before connecting the mains cord

> Reattach the back cover on

Playmaker Make sure to align the pivot points at the edges before closing the back cover.

> Fit the table stand into the two holes at the bottom of the back cover Run the cables above the table stand

How to get started

Press firmly on the snap hook to remove the back cover.

Make sure to align the pivot points at the edges before closing the back cover.

*The BeoSetup App supports iOS and Android devices only Scan the

QR code on page 3 to download the app.

*If you want a wireless network connection do not run the Ethernet cable through the cable cover For more information about network connection see ‘Network setup’