Инструкция ADA Robot 80 — страница 9

Инструкция

PDF

3,37 МБ

Инструменты / Контрольно-измерительные приборы

SofiaDoc63

Инструкция для ADA Robot 80 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

MEASUREMENT FOUNDATION

ROBOT 80

All target points must be in a horizontal or vertical plane.

The best results are achieved when the instrument is rotated about a xed point (e.g. with the positioning bracket fully folded out and the

instrument placed on a wall) or the instrument is mounted on a tripod.

The minimum / maximum function can be used. The minimum value must be used for measurements at right angles to the target; the

maximum distance for all other measurements.

Indirect measurement – determing a distance using 2 auxilary measurements.

E.g. When height and distance can’t be measured directly.

Press button 3 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.

Press button to take distance measuring . The result is displayed in the second line. The second distance to be measured is blink-

ing in the symbol triangle.

Press button to take distance measuring. There is a right angle between laser beam and the length you need to measure. That’s why

you should work in continious mode. Press and hold button for 2 sec. After second pressure of the button minimum distance is

xed. The result of the measurement is displayed in the second line. Previous measurement is displayed in the rst line. The result of the

function is displayed in the main display area.

After pressing button the result is displayed in the second line. Previous value is displayed in the rst line.

Indirect measurement – determing a distance using 3 measurements.

Press button 4 times. The symbol is displayed. The distance to be measured is blinking in the symbol triangle.

Press button to take distance measuring (side of the triangle) . The result of the function is displayed in the second line. The

second distance to be measured is blinking in the symbol triangle. It’s very important to have right angle between laser beam and the

length you need to measure. That’s why you should work in continious mode. Press and hold button for 2 sec. After second pressure

of the button minimum distance is xed (triangle height). The result of the measurement is displayed in the second line. Previous

measurement is displayed in the rst line. The result of the function is displayed in the main display area.

Скачать «ADA Robot 80» — 3,37 МБ СкачатьСкачиваний: 0

Инструкция ADA Robot 80 — страница 9

Другие руководства из этой категории