Добавить

Инструкция ADA Robot 80 — страница 8

Инструкция ФорматPDF Размер3,37 МБ Страниц38 КатегорияИнструменты / Контрольно-измерительные приборы ДобавилSofiaDoc63

Инструкция для ADA Robot 80 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 38
Вперёд →
MEASUREMENT FOUNDATION
8
ROBOT 80
Addition / Subtraction of areas
Area measuring – see Area.
Press button to enter into the Addition mode or button to enter into the Subtraction mode. Area value is displayed in the second line.
Press button to take the rst measurement (for example, length).Press button to take the second measurement (for example, width).
After the completion of area, press button , the result of substraction of areas is displayed in the main display area.
If the measurements are not nished, press button or to continue calculations.
Measurement of the wall surface
Measurement of the wall surface is used to determine the sum of the areas of several separate wall surfaces with overall height.
Press button . The symbol is displayed.
First measure the height. To measure the height press button .
Press bitton to measure the rst length of the wall. Do the same to measure the second wall length and so on.
Accumulative area value of the wall surface is displayed in the main display area. Wall height is displayed in the second line. The value of the last length
measurement is displayed in the rst line.
Volume
For volume measurements, press button twice until the indicator for volume measurement appears on the display.
Press button to take the rst measurement (for example, length). Measured value is displayed in the second line.
Press button to take the second measurement (for example, width). Measured value is displayed in the second line. Area value is displayed in the
rst line.
Press button to take the third measurement (for example, height). Measured value is displayed in the second line.
The volume value will be displayed in the main display area and the previous area value is displayed in the rst line.
Indirect measurement
Pythagorean measurement is used in the condition that the objective needing to be measured is covered or has no effective reecting
surface and can’t be measured directly.
Make sure you adhere to the prescribed sequence of measurement:
Скачать «ADA Robot 80» — 3,37 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?