Инструкция по эксплуатации Yamaha RX-V863 — страница 20

Connections

■ HDMI signal compatibility

Audio signals y

• If the input source component can decode the bitstream audio signals of audio commentaries you can play back the audio sources with the audio commentaries mixed down by using the following connections:
– multi-channel analog audio input (see page 25)
– DIGITAL INPUT OPTICAL (or COAXIAL)

• Refer to the supplied instruction manuals of the input source component and set the component appropriately.

• When CPPM copy-protected DVD-Audio is played back video and audio signals may not be output depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or

DVI components.

• To decode audio bitstream signals on this unit set the input source component appropriately so that the component outputs the bitstream audio signals directly (does not decode the bitstream signals on the component) Refer to the supplied instruction manuals for details.

• This unit is not compatible with the audio commentary features (for example the special audio contents downloaded via Internet)
of Blu-ray Disc or HD DVD This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents

Video signals This unit is compatible with the video signals of the following resolutions:

Video signal format

– 480i/60 Hz – 576i/50 Hz – 480p/60 Hz – 576p/50 Hz – 720p/60 Hz 50 Hz – 1080i/60 Hz 50 Hz – 1080p/60 Hz 50 Hz 24 Hz

Default input assignment of HDMI input jacks

■ HDMI jack and cable plug y

• We recommend that you use an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack

DVI-D jack) to connect this unit to other DVI components.

• Do not disconnect or connect the cable or turn off the power of the HDMI components connected to the HDMI OUT jack of this unit while data is being transferred Doing so may disrupt playback or cause noise.

• If you turn off the power of the video monitor connected to the

HDMI OUT jack via a DVI connection this unit may fail to establish the connection to the component.

• The analog video signals input at the composite video S-video and component video jacks can be digitally up-converted to be output at the HDMI OUT jack Set “VIDEO CONV.” to “ON”
in “MANUAL SETUP” (see page 88) to activate this feature.

Information on HDMI™

Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM

2ch 32-192 kHz 16/20/24 bit

CD DVD-Video DVD-Audio etc.

Multi-ch Linear PCM

8ch 32-192 kHz 16/20/24 bit

DVD-Audio Bluray Disc HD DVD etc.

2/5.1ch 2.8224 MHz 1 bit

SA-CD etc.

Bitstream

Dolby Digital DTS

DVD-Video etc.

Bitstream (High definition audio)

Dolby TrueHD Dolby Digital Plus DTS-HD Master Audio DTS-HD High Resolution Audio DTS Express

Blu-ray Disc HD DVD etc.

Notes

HDMI input jack

Assigned input source

DTV/CBL

Notes

HDMI

HDMI cable plug