Инструкция по эксплуатации Yamaha RX-V565 — страница 12

This unit supports up to 7.1-channel surround We recommend the following speaker layout in order to obtain the optimum surround effect.

7.1-channel speaker layout

6.1-channel speaker layout

5.1-channel speaker layout

■ Front left and right speakers (FL and FR)
The front speakers are used for the front channel sounds (stereo sound) and effect sounds Place these speakers at an equal distance from the ideal listening position When using a screen the appropriate top positions of the speakers are about 1/4 of the screen from the bottom.

■ Center speaker (C)
The center speaker is for the center channel sounds (dialog vocals etc.) Place it halfway between the left and right speakers When using a TV place the speaker just above or just under the center of the TV with the front surfaces of the TV and the speaker aligned When using a screen place it just under the center of the screen.

■ Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround sounds Place them at the rear left and rear right facing the listening position To obtain a natural sound flow in the 5.1-channel speaker layout place them slightly further back than in the 7.1-
channel speaker layout.

■ Surround back left and right speakers (SBL and SBR) Surround back speaker (SB)

The surround back left and right speakers are used for rear effect sounds Place them at the rear of the room facing the listening position at least 30 cm away from each other ideally at the same distance as that between the front left and right speakers In the 6.1-channel speaker layout surround back left and right channel sound signals are mixed down and output from the single surround back speaker In the 5.1-channel speaker layout surround back left and right channel sound signals are output from the surround left and right speakers

■ Subwoofer (SW)
The subwoofer speaker is used for bass sounds and lowfrequency effect (LFE) sounds included in Dolby Digital and DTS signals Use a subwoofer with a built-in amplifier such as the Yamaha Active Servo Processing Subwoofer System Place it exterior to the front left and right speakers facing slightly inward to reduce reflections from a wall.

Connections

Placing speakers

30 cm (12 in) or more

Speaker channels