Инструкция по эксплуатации Yamaha RX-V463 — страница 21

Connections

Both FM and AM indoor antennas are supplied with this unit Connect each antenna correctly to the designated terminals In general these antennas should provide sufficient signal strength.

See right for connection information of the supplied AM loop antenna.

• The AM loop antenna should be placed away from this unit.

- The AM loop antenna should always be connected even if an outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception than an indoor one If you experience poor reception quality install an outdoor antenna Consult the nearest authorized Yamaha dealer or service center about outdoor antennas.

Connecting the wire of the AM loop antenna y

The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal.

Assembling the supplied AM loop antenna

The types of the supplied AM loop antenna is different depending on the models.

Once all connections are complete plug the power cable into the AC wall outlet.

Connecting the FM and AM antennas

Notes

CENTER

WOOFER

UNBAL.

ANTENNA

DOCK

UNBAL.

ANTENNA

Indoor FM antenna (supplied)

Ground (GND terminal)

For maximum safety and minimum interference connect the antenna

terminal to a good earth ground A good earth ground is a metal stake driven into moist earth.

AM loop antenna (supplied)

Outdoor AM antenna

Use a 5 to 10 m (16 to 33 ft) vinyl-covered wire extended outdoors from a window.

(U.S.A model)

Note

Connecting the power cable

Open the lever

Insert

Close the lever

Power cable