Инструкция по эксплуатации Yamaha RX-V2065 — страница 8

Part names and functions a

HDMI indicator

Lights up during normal communication when HDMI is selected as an input source.

OUT 1/OUT 2 indicators

The respective indicator lights up when HDMI signals are output from the HDMI OUT 1/2 jacks.

CINEMA DSP indicator

Lights up when a sound field program that uses CINEMA DSP is selected.

CINEMA DSP 3D indicator

Lights up when CINEMA DSP 3D is activated.

Tuner indicator

Lights up during receiving radio broadcast signals from an FM/
AM station (page 31).

ZONE2/ZONE3 indicator

Lights up when Zone2 or Zone3 is turned on.

SLEEP indicator

Lights up when the sleep timer is activated (page 42).

MUTE indicator

Flashes when audio is muted.

VOLUME indicator

Displays volume levels.

Cursor indicators

Light up if corresponding cursors on the remote control are available for operations.

Multi information display

Displays menu items and settings for the current operation.

Speaker indicators

Indicate speaker terminals from which signals are currently output.

Note

• Before installing batteries or using the remote control make sure that you read “Notes on remote controls and batteries” in the “Caution” section.

■ Installing batteries a Take off the battery compartment cover. b Insert the two supplied batteries (AAA R03 UM-4) according to the polarity markings (+ and ) on the inside of the battery compartment.

c Snap the battery compartment cover back into the place.

■ Operation range The remote control transmits a directional infrared ray Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Front panel display

STEREO

SLEEP

VOL.

TUNED

MUTE

ZONE

ZONE

OUT 1 OUT 2

Subwoofer

Front L

Surround L

Surround back L

Center

Front R

Surround R

Surround back R

Surround back

Presence L

Presence R

Remote control a

30 30

Remote control sensor window within 6 m (20 ft)