Инструкция по эксплуатации ViTESSE VS-763 — страница 4

3.Cleaning tools use a Crevice tool:

For radiators crevices corners baseboards and between cushions.

b Dusting brush (2 in 1) is used for the furniture venation blinds book lamp shades and shelves,etc Separately it can be used as a sofa nozzle.

INSTRUCTIONS FOR USE Before using appliance pull out a sufficient length of cable and insert the plug into the power socket A yellow mark on the power cable shows the ideal cable length Don't expend the cable beyond the red mark.

1 Switch Button

Insert the power plug into the socket Press the ON/OFF Switch button to switch on the vacuum machine.

2 Auto Cord Rewind Button

To rewind the power cord press the rewind button with one hand and guide the cable with the other hand to ensure that it does not whip causing damage 3 Power Control Button

Slide the Electronic Power Control Button to control the suction of the cleaner.

MAINTENANCE 1 How to drop dust and clean the dust cup Always operate the cleaner with dust cup installed.

a Press the dust cup release button handing the dust cup handle take off the dust cup from the vacuum cleaner b Press the dust cup bottom release button then the dust will full down automatically.

c If find the filters too dirty please press the dust cup cover release button take out the filter assembly out of the dust cup then rotate the nylon filter or HEPA filter from the cover you can wash them with water You should dry them completely before you fix them on the cover and use again Please pay attention to the “A “ and “B” mark on both filters and cover in order to equip the filters at correct place on the cover 2 Install dust cup on the body: a Pull the dust cup bottom back to the dust cup until the button be locked. b Put the dust cup onto the body case properly. c Push on the dust cup to fix with body.