Инструкция по эксплуатации ViTESSE VS-762 — страница 3

Equipments:
1 3 wheels 2 Washable long-life filter 3 Automatic cable rewind 4 Maximum motor capacity 1800W 5 Exhaust air subject to multi-filter process 6 Electrical regulation of the suction capacity

Technical data:
Main connection: 230V/50Hz Capacity: 1800W GS CE EMC EMF We reserve the rights to make changes to the scope of deliverables equipment and the technical data!

Filter cleaning system:
The cleaner 1800W cyclone vacuum cleaner is fitted with a unique filter cleaning system This allows you to remove the dust from the receiver tank in a completely new clean and comfortable manner.

Explanation of accessories:
You will receive two different nozzles with your 1800W cyclone vacuum cleaner These allow the device to be utilized for a variety of applications.

Floor nozzle:
The floor brush is the fitting most commonly used That perfect for us on large even areas The 360 joint allows the nozzle to gain access to every corner with ease and without complication The toggle switch provides you with the option of using the floor nozzle with a range of floor coverings:
1 For carpets: Push the toggle switch to select the symbol for carpet By pressing the toggle switch you will have lowered the brushes.

2 For polished floor coverings press the toggle symbol for smooth flooring.

Brush nozzle:

3 The brush nozzle is the best fitting for cleaning sensitive surface such as picture frames or books.

Crevice nozzle:
The crevice nozzle is well suited to the vacuuming those areas that you are unable to gain access to tight spaces material folds corners and niches.

Assembling your 1800W Cyclone vacuum cleaner:

Attention:
Before attaching or detaching any accessories always ensure that you unplug the power supply from the wall socket!
1 Attaching or detaching the hose:

To attach: Push the vacuum hose into the air intake opening until it snaps into place To detach: Push the button on the vacuum hose to release the hose.

2 Attaching the telescopic tube and its accessories:

• Set the telescopic tube to the desired length In order to do this simply push the slide on the telescopic tube forwards before pulling on the lower part of the tube until it has reached the length required Once you have selected the optimum length let the slide return to its original position and ensure that it snaps shut.

• Now attach the floor brush to the telescopic tube as shown in the diagram Attach the crevice nozzle and brush nozzle using the same method.

• Mount the telescopic tube onto the handle