Инструкция по эксплуатации ViTESSE VS-756 — страница 2

DEAR CUSTOMER!
You have made an excellent decision Vitesse® “Nouveau” home range offers you an exclusive high quality range of appliances for your ultimate home luxury and healthy living.

IMPORTANT SAFEGUARDS When using an electrical appliance basic safety precautions should always be observed including the following.

READ ALL INSTRUCTIONS BEFORE USING

VACUUM CLEANER 1) COMPONENTS LIST 2) OPERATING MODE:

1 Connect the hose accessories:

Press the adaptors at both side of the hose end then insert the hose into the hose socket.

2 Connect the metal tube to the curved end of hose. 3 Connect the different nozzle tools/floor brush turbo brush to the tube for different cleaning purposes The floor brush has two positions soft/textile surfaces The combi nozzle is for narrow surfaces.

4 Turn on the appliance:

Hold the plug and pull out the cord then insert the plug into the power socket Make sure that the power supply corresponds to the required power mentioned on the rating label Press the on/off switch pedal to turn on the power Adjust power to the required level.

5 Turn off the appliance:

After using press the on/off switch pedal the appliance is turned off Pull the plug out of the power socket press the cord rewinding pedal the power cord will be drawn in.

6 To move the appliance from room to room unplug and carry it by using the handle Never pull the appliance by its cord when moving.

3) MAINTENANCE:

* Paper or Cloth dust bag 1 When the dust tank is full it is time to clean the dust To do that please follow the instructions:

(a) Open the front cover by pressing the lock clip (b) Lift off the Paper bag from dust bag hold Please always keep the dust inlet hole upper in order to void dust leakage.

(c) Empty the dust bag and install the dust bag to the holder Make sure the card of dust bag reach to the bottom of dust holder

(d) Close the front cover.

Read the instruction manual carefully before using this vacuum cleaner!

If the supply cord is damaged if must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

1 ON/OFF SWITCH PEDAL 2 HANDLE 3 CORD REWINDING PEDAL 4 POWER REGULATING

SWITCH

5 FRONT COVER 6 HOSE SOCKET 7 AIRFLOW INDICATOR 8 BOTTOM BRACKET 9 OUTLET BOARD

10 PARKING HOOK 11 WHEEL 12 POWER CORD 13 COMBI NOZZLE 14 TUBES 15 HOSE 16 FLOOR BRUSH 17 TURBO BRUSH