Инструкция по эксплуатации ViTESSE VS-703 — страница 2

1 Pusher 2 Tray 3 “T” Piece 4 Fixity keystoke 5 Tool box cover 6 Moment switch-knob (REV)
7 Revolve Switch-knob (I/O/II)
8 Body 9 Screw pusher 10 Big hole knife

11 Small hole knife 12 Revolve knife 13 Middle hole knife 14 Fixation nut 15 Long sheath 16 Short sheath 17 Plastic sheath 01 18 Plastic sheath 02

HOW TO USE

Mincing See below figure 2

1 Insert the worm shaft into the cutter housing the platic end first Fit the cutter blade unit onto the other end of worm shaft (The cutting edge should be placed at the front side) And then you can also fit the coarse/medium/fine grinding disc (Depending on the consistency you prefer) Make sure the notch of the grinding disc fit into the projection on the opening of cutter house Fit the screw ring on the cutter housing by turning the screw ring clockwise until it is properly fastened 2 Fit the cutter housing on the motor unit The lugs on the motor unit must fit precisely into the slots on the cutter housing Rotate the cutter housing anticlockwise until hear a click The cutter housing is then locked in the position You can remove the cutter housing by pressing the release button on the appliance and turning the cutter housing clockwise.

3 Place the tray on the upright part of the cutter housing. 4 Now the appliance is ready for mincing.

MINCING:
Cut the meat into 10 cm long 2 cm thick strips Remove bones pieces of gristle and sinews as much as possible Note: never use frozen meat!
Place the meat on the tray Use the pusher to gently push the meat into the cutter housing For steak tartare mince the meat with the medium grinding disc twice.

Dear Customer!
You have made an excellent decision Vitesse® “Nouveau” home range offers you an exclusive high quality range of appliances for your ultimate home luxury and healthy living.

BEFORE USING Read these instructions thoroughly first and keep them for future reference Check whether the voltage in the home corresponds with that of the appliance Only connect this appliance to an earthed electric socket.

Remove all packaging materials and stickers from the appliance Clean the appliance and all removable accessories and dry them thoroughly (see ”Cleaning and maintenance”) Place the motor unit on a flat and stable surface.

Structure Illustration