Инструкция по эксплуатации ViTESSE VS-118 — страница 5

Name and Operations of the Parts

Rid Chlorine = Removes Chlorine Electric water output = Electric Water output button Heat = Heat indicator Overheating alarm = over-heat temperature alarm indicator Keep Warm = Keep warm indicator Power = Power indicator Automatic = Automatic Cold switch button

Operation Description for VS-118

Method for Using the Air-Pot

1 Remove the Lid cover fill water into the container

Please fill the water do not wet the pot.

Fill the water till the FULL mark mentioned in the air-pot water will automatically flow out from the dispenser if it exceeds the full mark

Please close the lid cover after filling the water.

Note: Please immediately fill the water if the water dispense level is lower than the water supply mark;
otherwise it may cause dryboiling.

For re-boiling please press the re-boiling button and the heat indicator light will be on.

Time for re-boiling is about 2 3 m i n u t e s ( r o o m temperature: 20°C) 2 Boiling Keep Warm Function

1 Connect the power cord with the power socket. Ø

After connecting the power indicator light will be on (RED) and heat indicator light will be on (red) then the pot starts to boil the water

After the water is boiled the pot automatically switches on to “KEEP WARM” state heat indicator light will be off and keep warm indicator light will be on.

During keep warm course if the temperature drops and if it is lower than the set temperature the pot will automatically heat the water to the set temperatures.

3 After Use

Unplug the power plug from power socket

Remove the plug from the pot

Remove the lid cover

Drain out remaining water from the water drainage mark; do not let any water remain in the internal tank

Refill