ENGLISH
• Point the remote control directly at the player IR
- Remote any obstacles between the remote and the IR sensor
PICTURE BUT NO SOUND
- Ensure the audio jacks are securely connected.
- Ensure the audio connector is not damaged.
- Ensure the volume is turned up in VOL/CH setup.
- Ensure you have set the player AUDIO settings correctly sensor.
- Ensure you have entered the correct AV input for your TV.
- Ensure the audio is not set to mute
SOUND BUT NO PICTURE
- Ensure the video jacks are securely connected.
- Ensure you have entered the correct AV input for you TV.
- Ensure the video connector is not damaged.
- Ensure you have set the player VIDEO settings correctly.
POOR PICTURE OR SOUND
- Ensure you have set the player AUDIO settings correctly.
- Ensure the disc is not scratched or stained.
- Ensure the AV connector or the output terminal is not damaged.
UNIT NOT WORKING
- Turn off the power and then turn it on again.
“NO DISC” DISPLAYED
- Ensure you have put the disc on the tray.
- Ensure the disc is not upside down.
- Ensure the disc is not distorted stained or scratched.
Remote Control Preparation Battery installation 1 Open the cover Install batteries 3 Close the cover Using the remote Point the remote control at the remote sensor (The pictures below are for reference only.)
Notes:
- Point the remote control directly at the player’s remote sensor.
- Do not leave the remote control in an extremely hot or humid place.
- Do not spill water or put anything wet on the remote control.
Specifications Power requirements: AC 100-40 Volt 50/60Hz Power consumption: 15W Video standard: NTSC/PAL/Multi Unit Weight: .06kg Disc s COMPATIBILITY: MPEG4,DVD,DVD+ R/RW,VCD JPEG.CD-DA,CD-R CD-RW USB 1.1
Video out Video out: 1.0V(p-p)/75Ohm sync negative polarity RCA pin jack x 1 S-video output connector(separate Y C signal output connector):
Y output: 1.0V(p-p)/75Ohm sync negative polarity C output: 0.86V(p-p)/75
Audio out 5.1 channel out: RCA pin jackx6 Coaxial out: 0.5V(p-p)75 RCA pin Jack x l Frequency response: 0Hz to 0kHz S/N ratio:>90dB Total harmonic distortion: 5%
[Accessories]
Video Audio cable x 1 Remote Control x 1 User s Manual x 1 Battery x
Specifications are subject to change without notice Weight and dimensions are approximate.
Weight and size data are approximated.
The manufacturer reserves the right to make changes to the characteristics of the device without prior notice.
The service life of the device is no less than five years.
Guarantee Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (3/73 EEC)
4079.indd 14
18.08.2008 15:49:00
Инструкция по эксплуатации Vitek VT-4079 BK — страница 13
Инструкция для Инструкция по эксплуатации Vitek VT-4079 BK на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.