Инструкция по эксплуатации Vitek VT-4055 — страница 6

REAR PANEL

ENGLISH

1 AC IN power cord connection terminal Use to connect the power cord to the wall outlet.

2 COMPONENT VIDEO OUT jacks If your projective monitor or projector or other similar devices has component video inputs you can produce a higher quality picture on it by connecting its component video cable to the YCbCr jack on this unit.

3 AUDIO IN jacks

Use to input external stereo audio sources.

4 5.1CH AUDIO OUT jacks Use to output decoded 5.1 chan nel audio to multi channel receiver or amplifier The FL and FR jacks should be connected to the stereo input jacks of TV set or stereo amplifier.

5 VIDEO OUT jack Connect to the video input on a TV or moni tor or AV amplifier or receiver with video input capability.

6 OPTICAL DIGITAL AUDIO OUT jack Use to output digital audio recorded on discs by connecting to the optical digital audio input on an AV amplifier or receiver with digital audio input capability but you first need to change the setting to digital audio output on the SETUP MENU.

7 SCART OUT jack Connect to the SCART input on a TV or other devices with SCART input capability.

8 S VIDEO OUT jack If your TV or monitor has an S video input better picture reproduction is possible by connecting the player to your TV or monitor via the S video jack.

9 5.1CH AUDIO OUT Single jack Use to output decoded 5.1ch audio to multichannel receiver or amplifier via one single cable.

10 COAXIAL DIGITAL AUDIO OUT jack Use to output digital audio recorded on discs by connecting to the coaxial digital audio input on an AV amplifier or receiver with digital audio input capability but you first need to change the setting to digital audio output on the SETUP MENU.

11 RADIO ANTENNA input jacks AM/FM antenna input jacks.

4055.qxd 27.09.2005 9:46 Page 6