Инструкция по эксплуатации Vitek VT-3832

ФорматФормат: Руководство СтраницСтраниц: 2 КатегорияКатегория: Микрофоны ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Vitek VT-3832 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 2
Вперёд
Страница 1
It is very happy that you have this professional wireless micro phone of good quality which will bring you into a word where you can sing happily and freely to your heart's content so that you enjoy it admiringly.

HOW DO YOU OPERATE IT:
1 Screw off the housing insert a battery (size AA) with the correct polarity and screw on the housing before inserting the tele scopic antenna and set the switch to the ON position The pilot lamp is on at this time Insert another battery (size AA) into the receiver with the correct polarity Set the switch of receiver to On position then the pilot lamp is on that indicate a good con dition After that plug the receiver into the input socket for microphone of amplifier and it is ready for operation.

2 When you need temporary stop during singing and you don't want the microphone to pick up and other sound you may set the switch to the middle (MIC) position Now the lamp is still on but your microphone doesn't transmit any sound.

3 Use is as wired microphone:

Take out the battery form the microphone connect the wire to the microphone and set the switch to MIC position.

ATTENTIONS:
1 If acoustic quality and volume are abnormal or receiving dis tance is shorted the batteries in wireless microphone and receiver should be replaced if there after still not in normal operation you can carefully trim the frequency of receiver with a screwdriver to become normal operation.

2 If your microphone isn't used for a ling period the battery should be taken out to avoid its deterioration and the damage of components.

3 If two wireless microphones are used at the same time you must use them switch one red and another green lamp and can't use them with the lamp of the same color.

SPECIFICATIONS:
Microphone sensitivity 72 dB

Directivity uni directional

Frequency response 109 to 120 MHz

Output impedance 600ohm

Operating voltage 3 V or1.5V DC

Effective distance 15 to 30 M

ACCESSORIES:
1 1 receiver 2 1 Wireless antenna 3 1 wire for wired microphone

SERVICE LIFE OF THE MICROPHONE NOT LESS THAN 3 YEARS

ENGLISH

ENGLISH

СХЕМА ПРИБОРА:

1 Микрофон 2 Переключатель режимов работы (ON/MIC/OFF)
3 Корпус микрофона 4 Антенна 5 Антенна 6 Индикатор работы 7 Переключатель режимов работы (ON OFF)
8 Отсек для источника питания элемент "АА"
9 Корпус приемника 10 Штекер для подключения в микрофонный вход

ASSEMBLY DIAGRAM:

1 MIC set 2 ON/MIC/OFF switch 3 Microphone 4 Antenna 5 Antenna 6 Power indicator 7 ON OFF switch 8 Battery case 9 Body of receiver 10 Tip for connection

3832.qxd 12.01.04 10:35 Page 1
Нашли ошибку?