Инструкция по эксплуатации Vitek VT-3788 — страница 12

Note: to ensure complete recharge never press the STOP key.

2) Full recharge of 1200 mA/h batteries takes 10 hours When recharging the batteries of different capacitance select the required recharge time using the Skip to the previous/next track keys. 3) In the process of recharge the unit will be slightly heated this is normal. 4) Never attempt to recharge fully charged batteries this will reduce their lifetime. 5) The symbol flashing on the LCD means that the batteries are low and need recharging. 6) Never use the batteries without insulated housing this may cause short circuit and damage the player. 7) Always use the batteries of the same type and age. 8) Do not forget to remove the batteries if the unit is supplied from another power source. 9) Never attempt to recharge common dry batteries This may cause explosion and battery leakage. 10) Never use low-quality discs or batteries this may reduce the service life of the player

UNIT AND DISC MAINTENANCE

1 Unit maintenance

1) Read this instruction manual carefully before using the unit for the first time improper operation may cause malfunctioning or damage the player. 2) Never touch the laser lens and make sure it never touches any hard objects. 3) Never put heavy objects on the unit this may cause damage. 4) Do not expose the unit to a continuous shaking or blows
this may reduce the service life of the reading mechanism. 5) If there are any sound distortions while reproducing highquality discs use special discs to clean the laser lens. 6) Frequent reproduction of twoin-one discs may also reduce the service life of the laser head. 7) Do not use low-quality or deformed discs this may cause damage to the laser lens. 8) Never try to reproduce dirty discs 2 Disc maintenance:

1) Keep the disc clean Hold it by the edge and by the internal opening. 2) Never stick any paper or adhesive type on the disc surface. 3) Do not expose the disc to

ENGLISH

Vt-3788.qxd 08.02.2005 10:26 Page 11