Инструкция по эксплуатации Vitek VT-3787 — страница 12

Protection against Playback Interruption (ESP/ANTI-SHOCK SYSTEM)

• When the function is activated it stops playback interruption after external pressure.

• Press ESP button (14) during CD playback the message "ESP" starts flashing and the function of protection against playback interruption (ESP/ANTI-SHOCK SYSTEM) is activated.

• If external pressure continuously impacts on the player for more than 45 seconds (in CD mode) or 120 seconds (in MP3 mode) the sound can be interrupted and the message "ESP" will flash.

• To turn off the function press ESP button (14) once again Note:

- When the protection against playback interruption is activated the disc rotates faster than in the normal playback mode To economize battery use use this function only when necessary.

• The function does not improve the playing of scratched or spoiled discs.

- IMPORTANT! In MP3 mode the function of protection against play back interruption is always active and it is impossible to switch it off.

HOLD Switch (17)

It is used to block all buttons on the player To activate it put HOLD switch (17) in "ON" position.

CARE Cleaning the Device

Wipe the exterior of the player with a soft cloth slightly moistened with warm soapy water.

Handling CD Discs

• Your player has been created to play discs with CD or MP3 marking Discs of other formats will not work.

• Always put discs with the label side facing up.

- Damage of a disc surface or its improper handling affects the playback quality.

• To prevention disc damage handle it accurately.

- Keep disc surface clean and if necessary wipe it with a dry cloth from the center to the edge.

• Do not use cleaning sprays antistatics or chemical reagents to clean the

ENGLISH

Vt-3787.qxd 20.12.2004 17:17 Page 11