Инструкция по эксплуатации Vitek VT-3786 — страница 4

• Should the player receive shocks for more than 45 seconds continuously the sound can mute for a very short while and will resume once the player has stabilised from the shock Notes:

- When using the Anti-shock function the disc will rotate faster than normal playback and memory is active Only use the ANTI-SHOCK function when necessary to preserve the battery life.

- The Anti-shock function will not correct the errors arising from the use of defective scratched or dirty discs.

HOLD switch

This unit is equipped with a HOLD switch to disable the operating controls Select HOLD switch (17) to "ON".

CONNECTING TO HOME STEREO SYSTEMS

The line out jack is made to accept a stereo mini plug (3.5 mm) By using a commercially available audio line cable simply connect the cable's mini plug to line out jack on your player and the other appropriate end to CD/AUX input(s) of your home stereo system Note: Always switch the power off before making any connections between the player and any other set Note: The volume control or the player become inoperable when the line out jack is used Adjustments are made on your audio system.

CLEANING CLEANING THE PICKUP LENS

A dirty lens will cause sound skipping If the lens is very dirty the player may not work Open the CD door and clean the lens as follows:

- FINGERPRINTS ON LENS Use a cotton swab starting in the middle and working to the outside edge pay attention in doing this operation or the pick up lens could be damaged.

ENGLISH

4 Press the CD Mode button (2) once to return to the Normal Playback mode.

PROGRAMMED PLAYBACK

1 Press the PLAY/PAUSE button (6) and after 3 seconds the STOP button (5). 2 Press the PROGRAM button (1) The track number and 'PROGRAM' will appears on the display when press the PROG button. 3 Press BACKWARD (SKIP ) or FORWARD (SKIP ) button to select the desired track to be programmed The track number which will be programmed will appears on the display. 4 Press the PROGRAM button (1) to enter the track into memory. 5 Repeat the steps 3 and 4 to program up to 20 tracks. 6 Press PLAY/PAUSE button (6) once to start programmed playback. 7 To cancel programmed playback press the STOP button (5) twice Note: Programmes can be set in Stop mode only During program playback if you wish to repeat the entire programmed playback press the MODE button repeatedly until the ( ALL ) indicator appears on the display.

SPECIAL FUNCTIONS Dynamic Bass Boost

Set the BASS BOOST switch (13) to "ON" position to enjoy a more powerful Bass sound Note: Since Bass Boost performance will change depending on the volume level sound maybe distorted due to high volume is set Lower the volume level until the sound quality is improved.

Auto Power Off

When the unit is stopped (standby mode) for approximately 30 seconds the Auto Power Off function will activated and turn the unit off automatically.

Anti-shock Function

• If in use the player is likely to receive shocks or vibrations (i.e whilst walking or in a moving vehicle) press the ANTI-SHOCK button (14) to provide uninterrupted playback.

- When the button is pressed the display will show ( ) and the function is initialised When ( ) appears on the display the data buffer is full.

ENGLISH