Инструкция по эксплуатации Vitek VT-3782 — страница 8

playing to scan the disc at high speed When the desired section of the disc is found release the button Normal play will resume. 1 If you press and hold the FWD button (18) while playing it will scan the curr playing track forward at high speed.

2 If you press and hold the BACK button (19) while playing it will scan the curr playing track backward at high speed.

40 SECONDS ELECTRONIC SHOCK PROTECTION SYSTEM The digital ELECTRONIC SHOCK PROTECTION function uses semiconductor memory to prevent the sound from skipping when the unit is subjected to shocks and vibration during play.

- While the “Anti Shock” button is pressed during play the indicator appears in the display and the digital ELECTRONIC SHOCK PROTECTION function turns on The digital datd equivalent to approximately 40 seconds of music is stored in a “read ahead” memory buffer before it is decoded and played The one mark changes to the other mark indicating that the data buffer is full.

• When the unit is subjected to a shock during play the data stored in memory continues to be decoded and played This gives the pickup time to stabilize and continue reading new data As the data is read from memory the indicator changes.

• Once the pickup returns to its original position new data is stored in memory and the display changes back to the other mark Press the “Anti Shock” button to turn the digital Electronic Shock Protection function off.

NOTE: Keep the digital electronic shock protection function off when using the unit in a stable location where it will not be subjected to shocks The battery power con sumption is reduced when the electronic shock protection function is turned off NOTE: When the digital electronic shock protection function is switched on or off the sound wil be interrupted for 1 to 2 seconds.

VARIOUS PLAYING MODES PROGRAMMED PLAY The tracks on the disc can be programmed for playing in any order (Up to 20 tracks can be programmed.)

- During programming "PROG" flashes in the display.

Program Number

Track number

1 Press the PROGRAM button (4) during playing or in stop mode " PROG " and

ENGLISH

ПОВТОР ОДНОЙ ДОРОЖКИ 1 Нажмите кнопку P MODE (8) один раз загорится индикатор повторного воспроизведения “REPEAT 1”.

2 Нажимайте кнопки SKIP/SEARCH #/$ пока номер нужной дорожки не высветится на дисплее.

3 Дорожка будет воспроизводиться непрерывно до тех пор пока Вы не нажмете кнопку STOP (16).

ПОВТОР ВСЕХ ДОРОЖЕК 1 Нажмите кнопку P MODE (8) дважды загорится индикатор повторного воспроизведения “REPEAT ALL”.

2 Нажмите кнопку "PLAY/PAUSE" (10) Дорожки будут воспроизводится непрерывно до тех пор пока Вы не нажмете кнопку STOP (16).

ПРОИГРЫВАНИЕ В РЕЖИМЕ “INTRO”
1 Нажмите кнопку P MODE (8) три раза загорится индикатор “INTRO”.

2 Нажмите на кнопку "PLAY/PAUSE" для проигрывания первых 10 секунд каждой дорожки.

ВОСПРОИЗВЕДЕНИЕ ДОРОЖЕК В ПРОИЗВОЛЬНОМ ПОРЯДКЕ Дорожки диска могут воспроизводиться в произвольном порядке (выбор последовательности проигрыватель осуществляет самостоятельно) Для этого нажмите кнопку P MODE (8) четыре раза а затем кнопку "PLAY/PAUSE"

РУССКИЙ

3782.qxd 02.07.03 15:38 Page 16