Инструкция по эксплуатации Vitek VT-3778 — страница 4

POWER SUPPLY Use with regular batteries (not included)

1 Open the battery compartment door located in the inside of the unit by sliding the door and lift it up (Do not remove the battery door). 2 Insert 2 x 1.5V UM-3/AA size alkaline batteries following the correct polarity as indicated in the battery compartment. 3 Close the battery compartment door Note: If the symbol " " appears in the display batteries are weak and ought to be replaced.

Use with AC/DC adaptor

1 Insert the DC plug at the end of the AC/DC adaptor cord into the DC 4.5 V INPUT socket (19) located on the side of the unit. 2 Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet Notes:

- If the AC adaptor is connected when regular batteries are installed the power supply automatically switches to the AC power source.

- Use only the supplied AC/DC adaptor Using other types of adaptor may damage the unit.

- Make sure that the AC/DC adaptor matches with your household voltage before con necting it into the wall outlet.

- When not using AC power disconnect the AC/DC adaptor from the wall outlet.

- Do not touch the AC/DC adaptor with wet hands.

Use rechargeable batteries (not included)

1 Disconnect the AC/DC adaptor from the wall outlet if it is being connected to the unit. 2 Open the battery compartment door as mentioned previously. 3 Insert 2 recommended rechargeable batteries following the correct polarity as indicated in the battery compartment. 4 Close the battery compartment door. 5 Move the CHARGE SWITCH (16) to ON to start recharging function The red CHARGE indicator (12) will light up. 6 After 15 hours of charging set the CHARGE SWITCH (16) to OFF.

ENGLISH

Vt-3778.qxd 23.11.2004 12:32 Page 3