Инструкция по эксплуатации Vitek VT-3608 — страница 5

СХЕМА ПОДКЛЮЧЕНИЯ МАГНИТОЛЫ

СПЕЦИФИКАЦИЯ

Питание

DC 12 В отрицательное заземление

Выходная мощность

4 х 25 Вт

Магнитофон Система воспроизведения

4 дорожки 2 направления

Скорость ленты

4,75 см/с

Взвешенное значение детонации 0,4%

Взвешенное значение сигнал/шум 40 дБ

Радиоприемник FM диапазон 64 108 МГц

AM диапазон

540 1600 КГц

СРОК СЛУЖБЫ АВТОМАГНИТОЛЫ НЕ МЕНЕЕ 3 Х ЛЕТ

РУССКИЙ

9 LO/DX BUTTON After power up DX mode will be selected automatically the radio is at highest sen sitivity When searching for stations in some areas where the stations are crowed select Local mode (LO) to receive the strongest stations only When Local mode is selected the "LOC" symbol on the LCD will light up.

10 FM STEREO/MONO BUTTON In some areas where FM stereo signal is not strong enough background noises will appear in this case select FM mono mode will reduce such noises When an FM stereo station is received and FM stereo mode is selected the FM stereo indi cator on the LCD will light up.

11 “OPEN” BUTTON

12 DISPLAY

13 “TAPE” BUTTON

MAINTENANCE For System The following suggestions help you care for the product so that you can enjoy it for years. 1.

Keep the product dry If it does get wet wipe it dry immediately Liquids might contain minerals that can corrode the electronic circuits.

2.Keep the product away from dust and dirt which can cause premature wear of pans.

3 Handle the product gently and carefully Dropping it can damage circuit boards and cases and can cause the product to work improperly.

4 Wipe the product with a dampened cloth occasionally to keep it looking new.

Do not use harsh chemicals cleaning solvents or strong detergents to clean the product.

5 Use and store the product only in normal temperature environments.

High temperature can shorten the life of electronic devices damage batteries and distort or melt plastic parts

For Tape Player Periodic cleaning of the tape head and capstan shaft will ensure good reproduc tion of music and trouble free operation Cleaning of the tape head should be done every 20 to 30 hours of operation or when the high tones have become less clear. 1.

Use a cassette cleaning cartridge if available If one is not available use a cot ton swab soaked in isopropyl (rubbing) alcohol.

2 While holding the tape door open locate tape head to the right of the opening and in the centre of the unit.

ENGLISH

3608.qxd 12.02.03 11:08 Page 10