Инструкция по эксплуатации Vitek VT-3532

FEATURES:

12/24 Hour time display selectable

Temperature in °C/°F selectable

Calendar display up to Year 2050

Week count display

Snooze Alarm function.

SET UP:

Remove the insulator (8).

2 x AA batteries inserted.

Press "RESET" (7) hole on the back of the unit with a pin.

MANUAL TIME SETTING •

Hold MODE (3) button until Hour digit flashes.

Press "+" (6) or " " (5) to adjust Hour Minute Second Year Month Date and Time Zone.

Press MODE (3) button to confirm each setting.

Note: Second can only be adjusted to zero only.

DAILY ALARM SETTING:

Press MODE (3) button once to select Alarm Time Display Icon "AL" appears on the LCD (2).

Hold MODE (3) button for 3 seconds and press "+"
(6) or " " (5) buttons to adjust the alarm time.

Press MODE (3) button to confirm each setting.

Press "ALARM" (4) button to switch the alarm on or off.

" will appear on the LCD if the alarm is on.

SNOOZE ALARM FUNCTION:

Press SNOOZE button (1) when alarming The alarm snoozes for 5 minutes then it alarms again.

Simply press other buttons to stop snooze alarm.

THERMOMETER:

Press " " (5) button to select the temperature to be displayed in °C/°F.

12/24 HOUR FORMAT:

Press "+" (6) to select hour to be displayed in 12 hour or 24 hour format.

NOTES/REMARKS:

All function keys do not work when the radio signal is being scanned.

Avoid placing the clock near interference sources/metal frames such as computer monitor or TV sets.

Placing the clock closer to a window/towards the general direction of the Transmitter The signal is weaker in basement.

Never use the clock in bathroom or any other area with high humidity.

The operating temperature of the clock is 0° 60°.

The clock loses its time information when the bat tery is removed.

SERVICE LIFE OF THE LCD ALARM CLOCK WITH CALENDAR NOT LESS THAN 3 YEARS

3532.qxd 29.10.03 12:29 Page 1