Инструкция по эксплуатации Vitek VT-3512 — страница 4

ФорматФормат: Руководство СтраницСтраниц: 20 КатегорияКатегория: Часы ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Vitek VT-3512 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 20
Вперёд
Страница 4
tion which automatically turns off the radio after a preset period – from 1 hour 59 minutes to 1 minute.

2 Press the SLEEP button (3) and holding it down set the time using the HOUR button (4) and the MIN button (6) after which the radio should turn off automatically.

3 To turn the radio off before the set time press the SNOOZE button (2).

WAKING UP TO MUSIC OR A BUZZING ALARM 1 Set the ON/AUTO/OFF selector (10) to the AUTO position.

2 Tune to the desired radio station.

3 Set the desired volume. 4 The radio will turn on at the desired time.

5 If you want to wake up to the buzzing alarm set the VOLUME/BUZZER knob (13)
to the BUZZER position.

6 The buzzing alarm will turn on at the desired time.

“SNOOZE” FUNCTION The radio or buzzing alarm can be silenced for 9 minutes by pressing the SNOOZE button (2) You can lightly sleep during this time In 9 minutes the alarm repeats itself.

If you want to fall asleep and wake up to music 1 If you want to fall asleep and wake up to music set the alarm time as instructed in the “Setting the Alarm Time”
section and set the selector (10) to the AUTO position.

2 Set the SLEEP timer as instructed in the “Sleep Timer” section and adjust the volume.

3 The radio will automati­

cally turn off after the preset SLEEP period and turn on automatically the next day.

DISPLAY LIGHTING SWITCH When the display lighting switch (15) is set to HI information shown on the display will be brighter than when the switch is set to the LO position.

SPECIFICATIONS Frequency Bands:

FM1  6487 MHz

FM2  88108 MHz

Speaker: 2.25” 8 Ohms Battery: 9 V (not included)
Power Source:

230 V~50 Hz

ENGLISH

3512IM_new.indd 4

19.11.2008 11:35:34
Нашли ошибку?