Инструкция по эксплуатации Vitek VT-3492 — страница 7

OPERATING INSTRUCTIONS

SYSTEM ON/OFF SWITCHING

Connect AC power cord of the system to the electrical outlet Make sure that supply voltage corresponds to the system voltage Turn MAIN POWER switch (26) into ON position.

1 To turn the system ON press the POWER button (8) or (30). Note: LCD (11) will light.

2 With FUNCTION button (4) or (33) select desired operating mode (TUNER CD TAPE or AUX).

Note: When TUNER is selected display will show tuning frequency.

Example: Tuner FM mode

3 To turn the system OFF press the POWER button (8) or (30)

LCD (11) will go out and STANDBY indicator (7) will light.

CURRENT TIME SETTING

When connecting the system into AC mains for the first time display shows " : " To set current time perform the following:

1 In OFF mode press and hold down the PROGRAM button (20) or (50) for several seconds then select 12-hr or 24-hr mode (If the data is not entered within 10 seconds display returns into initial condition).

2 Press the TUNING/SKIP button (1) or (39)/(47) to select 12-hr or 24-hr mode.

3 Press the PROGRAM button (20) or (50) again hour digits will start blinking Then press the TUNING/SKIP button (1) or (39)/(47) to set hours.

4 Press the PROGRAM button (20) or (50) again minute digits will start blinking Then press the SKIP Forward or Backward button (1)
or (39)/(47) to set minutes.

5 Press the PROGRAM button (20) or (50) again to start timing.

ENGLISH

3492.qxd 20.10.2004 18:30 Page 6