Инструкция по эксплуатации Vitek VT-3486 — страница 5

GETTING STARTED

CONNECTING THE SPEAKERS Connect the right-speaker cable (47) to the right-speaker jack (45) on the rear panel of the system Connect the left-speaker cable (48) to the left-speaker jack (46) on the rear panel of the system.

The speakers can be mounted on the wall using the mounting holes located on the rear panels of the right and left speakers (49,50).

HOW TO PUT BATTERIES IN THE REMOTE CONTROL Insert ÀÀÀ batteries in the Remote Control; match the polarity on the batteries with the corresponding markings in the battery compartment.

AM ANTENNA An AM antenna is located inside the unit Rotate the unit so as to obtain the best reception of AM radio stations.

FM ANTENNA Extend the antenna to its full length to obtain the best reception of FM radio stations

STEREOPHONE JACK For private listening connect stereophones (not provided) to the corresponding jack (11) Adjust the required volume level using the volume controls After connecting the stereo phones the sound from speakers switches off automatically.

TURNING THE SYSTEM ON AND OFF Press the POWER ON button (1) to turn the system on and the Power indicator (8) will light up Press the POWER ON button (1) again and the system will turn off.

BASS EXTENSION SYSTEM XBS Press the On/Off bass extension button XBS (12) to enrich the sound.

VOLUME To adjust the required volume level press and hold VOLUME+ (13) or VOLUME (14) control or respectively R13 or R15 on the Remote Control.

ANTI-SHOCK FUNCTION The playback interruption protection can be activated in CD/MP3 mode only The maximum period of the function is 20 seconds

CD PLAYBACK Using the Function switch (CD/CASSETTE/RADIO) (2) select CD playback mode After that CD will turn on and " " will blink on the display as shown in FIG 1.

[FIG 1.]

Should there be no disc in the CD compartment the "

" indication lights up on the LCD display as shown in fig 2.

[FIG.2.]

ENGLISH

3486.qxd 24.09.2004 18:05 Page 4